Bosch WAT28401UC Dimensions, Clearances & Fit Guide

This guide provides all the key measurements for the WAT28401UC washing machine. Review dimensions, clearance requirements, door swing, pedestal and stacking options, and installation notes to ensure a proper fit in your home.

Key Dimensions

Width	23.5 in
Height	33.25 in
Depth	25 in
Depth w/ Door Open 90°	42.5 in
Capacity	2.2 cu. ft.
Weight	160 lb
ADA Compliant	Yes (when installed on pedestal)
ENERGY STAR® Certified	Yes

Clearance Requirements

Front View Front-Load Clearance for Washer

Side View Front-Load Clearance for Washer

Front	21 in
Sides	0.5 in
Rear	5 in
Top	1 in

Proper clearance ensures safe operation, reduces vibration, and allows for adequate airflow. Always maintain the minimum space on all sides to prevent overheating and to make servicing easier.

Door Swing & Accessibility

Door Swing	Left-hinged (non-reversible)
Door Swing Maximum	140°

Allow room for full door swing.
Meets ADA accessibility standards.

Pedestal & Stacking Compatibility

Pedestal Compatible	Yes
Models	WMZ20490

Stackable	Yes
Stacking Kit	WTZ20410UC

Installation Notes

Flooring & Leveling

Solid, level surface
Concrete preferred
Level all four feet

Drain & Plumbing

Drain height: 24–39 in
High‑quality stainless‑steel hoses recommended

Electrical

240V 60 Hz AC only
15 amp circuit
NEMA 6-15 (3-prong 240V)
Accessible plug required

Service Access

Water supply accessible
Drain connection accessible
Maintain rear access for water, drain, and electrical connections.

How the WAT28401UC Fits Within Bosch’s Lineup

The Bosch WAT28401UC is a previous‑generation 500‑Series compact washer that offered quiet operation (52 dBA wash / 72 dBA spin), efficient cleaning, and Bosch's proven 24‑inch form factor. It features 15 wash cycles, 9 options, an internal water heater with Sanitize cycle, and a 1,400 RPM maximum spin speed. Although discontinued, it remains common in condos and small homes, and is still frequently referenced for replacement planning and fit‑guide purposes.

FAQ About This Washer

No. The WAT28401UC is a 500 Series model with upgraded features, while the WAT28400UC is a 300 Series model.

Yes. It stacks with any 24‑inch Bosch dryer using the WTZ20410UC stacking kit.

No special ventilation is required, but Bosch specifies at least 5 in of rear clearance for hoses and airflow.

No. The door is permanently left‑hinged and cannot be reversed.

A minimum of 42.5 in is recommended to accommodate the door‑open depth and rear clearances.

Yes, as long as the drain height is between 24 and 39 inches.

Yes, but Bosch recommends a solid floor surface and proper leveling to minimize vibration.

A dedicated circuit is not required, but avoid sharing the circuit with high‑load appliances.

Yes, provided all clearances are maintained and the front remains unobstructed for airflow and service.

Yes. Bosch continues to supply parts and service support for this model even though it is discontinued.

Yes, the unit meets ADA height and access requirements when installed on a pedestal.

The washer requires a 240V NEMA 6-15 outlet (3-prong).