Bosch WFMC2201UC (Nexxt 300 Series) Dimensions, Clearances & Fit Guide

This guide provides all the key measurements for the WFMC2201UC washing machine. Review dimensions, clearance requirements, door swing, pedestal and stacking options, and installation notes to ensure a proper fit in your home.

Key Dimensions

Width	27 in
Height	37 in
Depth	31.56 in
Depth w/ Door Open 90°	46.7 in
Capacity	4 cu. ft.
Weight	220 lb
ADA Compliant	No
ENERGY STAR® Certified	Yes

Clearance Requirements

Front View Front-Load Clearance for Washer

Side View Front-Load Clearance for Washer

Front	0.25 in
Sides	0.25 in
Rear	2.5 in
Top	12 in

Proper clearance ensures safe operation, reduces vibration, and allows for adequate airflow. Always maintain the minimum space on all sides to prevent overheating and to make servicing easier.

Door Swing & Accessibility

Door Swing	Left-hinged (non-reversible)
Door Swing Maximum	180°

Allow room for full door swing.
Meets ADA accessibility standards.

Pedestal & Stacking Compatibility

Pedestal Compatible	Yes
Models	WTZ1295

Stackable	No
Stacking Kit

Installation Notes

Flooring & Leveling

Solid, level surface
Concrete preferred
Level all four feet

Drain & Plumbing

Drain height: 24–39 in
Replace original hoses with modern stainless-steel hoses

Electrical

120V 60 Hz AC only
15 amp circuit
3-prong grounded outlet
Accessible plug required

Service Access

Water supply accessible
Drain connection accessible
Maintain rear access for water, drain, and electrical connections.

How the WFMC2201UC Fits Within Bosch’s Lineup

The Bosch WFMC2201UC is part of the Nexxt 300 Series, a full-size 27-inch washer lineup. It features a 4.0 cu. ft. capacity, 11 wash cycles, an internal water heater, SENSOTRONIC Plus load sensing, and a maximum spin speed of 1,000 RPM. This model is not stackable and requires dedicated closet clearances (12" top, 0.25" sides). Although discontinued, it remains installed in many homes and is frequently referenced for replacement planning.

FAQ About This Washer

The WFMC2201UC is a full-size 27-inch washer with a 4.0 cu. ft. capacity, not a compact 24-inch model.

No. This model is not designed to be stacked.

Yes. It is compatible with the WTZ1295 pedestal.

Sides: 1/4 inch, Top: 12 inches, Rear: 2.5 inches, Front: 1/4 inch. Ventilation openings of 48 sq. in. (top) and 24 sq. in. (bottom) are also required. [citation:2]

No. The door is permanently left-hinged and cannot be reversed.

Yes, provided the drain height is between 24 and 39 inches.

Yes. It consumes approximately 165 kWh/year.

Yes, but due to its weight (220 lbs) and high spin speeds, a solid floor surface and proper leveling are essential.

Yes. Many parts remain available due to shared components across the Nexxt series.

No. Units are not designed for under-counter installation. The required 12inch top clearance in closets makes under-counter installation impractical.

The door opens to a full 180 degrees.