Frigidaire FAFS4272LW Dimensions, Clearances & Fit Guide | Helper Husky

Frigidaire FAFS4272LW Dimensions, Clearances & Fit Guide

This guide provides all the key measurements for the FAFS4272LW washing machine. Review dimensions, clearance requirements, door swing, pedestal and stacking options, and installation notes to ensure a proper fit in your home.

Key Dimensions

Width27 in
Height36 in
Depth31.5 in
Depth w/ Door Open 90°50.5 in
Capacity3.8 cu. ft.
Weight245 lb
ADA CompliantNo
ENERGY STAR® CertifiedYes
Front View Front-Load Washer Dimensions
Side View Front-Load Washer Dimensions

Clearance Requirements

Front View Front-Load Clearance for Washer
Side View Front-Load Clearance for Washer
Front21 in
Sides1 in
Rear5 in
Top1 in
Proper clearance ensures safe operation, reduces vibration, and allows for adequate airflow. Always maintain the minimum space on all sides to prevent overheating and to make servicing easier.

Door Swing & Accessibility

Front-Load washer Door Swing
Door SwingLeft-hinged (non-reversible)
Door Swing MaximumNot specified by manufacturer
Allow room for full door swing.
Meets ADA accessibility standards.

Pedestal & Stacking Compatibility

Pedestal compatible
Pedestal CompatibleYes
Models
  • CFPWD15W
Stackable compatible
StackableYes
Stacking Kit[STACKIT4X]

Installation Notes

Flooring & Leveling
  • Solid, level surface
  • Concrete preferred
  • Level all four feet
Drain & Plumbing
  • Drain height: 24–96 in
  • High‑quality stainless‑steel hoses recommended
Electrical
  • 120V 60 Hz AC only
  • 15 amp circuit
  • Standard 3-prong 120V
  • Accessible plug required
Service Access
  • Water supply accessible
  • Drain connection accessible
  • Maintain rear access for water, drain, and electrical connections.

How the FAFS4272LW Fits Within Frigidaire’s Lineup

The Frigidaire FAFS4272LW was part of the Affinity Series front‑load washers, known for their balance of affordability, capacity, and Energy Star efficiency. Although discontinued, it remains widely installed in North American homes and is frequently searched for replacement planning, closet fit, and stacking compatibility.

FAQ About This Washer

The FAFS4272LW is a full-size 27-inch front-load washer with a 3.8 cu. ft. capacity.

Yes. It can be stacked with compatible Frigidaire dryers using the STACKIT4X stacking kit.

No. The door is permanently left‑hinged and cannot be reversed.

The depth with the door open at 90 degrees is approximately 50.5 inches.

Sides: 1 inch, Top: 1 inch, Rear: 5 inches, Front: 21 inches.

No, but it is compatible with the CFPWD15W pedestal if additional height or storage is desired.

A standard 120V, 15-amp household outlet.

Yes, as long as the drain height is between 24 and 96 inches.

Yes, but Frigidaire recommends a solid floor surface and proper leveling to minimize vibration.

Yes, this model is Energy Star rated.

Yes, provided all clearances are maintained and the front remains unobstructed.

Yes. Frigidaire continues to supply parts and service support for this model.

The FAFS4272LW has a maximum spin speed of 1,100 RPM.

Yes, it includes an internal heater for sanitizing and high‑temperature cycles.

This information is provided for educational and planning purposes only. For official specifications, installation requirements, and the most accurate recommendations, please refer to the official Frigidaire website. Visit Frigidaire’s official site .

Copyright 2026. All rights reserved.