Frigidaire FFFW5000QW Dimensions, Clearances & Fit Guide

This guide provides all the key measurements for the FFFW5000QW washing machine. Review dimensions, clearance requirements, door swing, pedestal and stacking options, and installation notes to ensure a proper fit in your home.

Key Dimensions

Width	27 in
Height	36 in
Depth	27.75 in
Depth w/ Door Open 90°	50.25 in
Capacity	3.9 cu. ft.
Weight	227 lb
ADA Compliant	No
ENERGY STAR® Certified	No

Clearance Requirements

Front View Front-Load Clearance for Washer

Side View Front-Load Clearance for Washer

Front	21 in
Sides	1 in
Rear	5 in
Top	1 in

Proper clearance ensures safe operation, reduces vibration, and allows for adequate airflow. Always maintain the minimum space on all sides to prevent overheating and to make servicing easier.

Door Swing & Accessibility

Door Swing	Left-hinged (non-reversible)
Door Swing Maximum	140°

Allow room for full door swing.
Meets ADA accessibility standards.

Pedestal & Stacking Compatibility

Pedestal Compatible	Yes
Models	CFEPEDW

Stackable	Yes
Stacking Kit	STACKIT4X

Installation Notes

Flooring & Leveling

Solid, level surface
Concrete preferred
Level all four feet

Drain & Plumbing

Drain height: 24–96 in
High-quality inlet hoses recommended

Electrical

120V 60 Hz AC only
15 amp circuit
3-prong grounded outlet
Accessible plug required

Service Access

Water supply accessible
Drain connection accessible
Ensure rear access for water, drain, and electrical

How the FFFW5000QW Fits Within Frigidaire’s Lineup

The Frigidaire FFFW5000QW represents the brand’s straightforward, value-focused front‑load washer tier. It offers a full 27‑inch footprint, a 3.9 cu. ft. capacity, and essential cycle options without the premium features found in higher-end models. It’s a popular choice for homeowners seeking a reliable, budget-friendly front‑load washer with simple controls and a compact depth profile.

FAQ About This Washer

Yes. At 27.75 in deep, it fits many shallow closets, but allow space for hoses and door swing.

A minimum of 5 in is required for hoses, electrical, and service access.

Yes, using the STACKIT4X stacking kit, which is compatible with multiple Frigidaire dryers.

The drain must be between 24 and 96 in high.

Yes, but vibration may be higher than premium models; a solid floor surface is recommended.

Yes. The door‑open depth is about 50.25 in from the back wall.

Yes, if you maintain 1 in side clearance, 5 in rear clearance, and proper ventilation.

Yes — it is compatible with the CFEPEDW pedestal.