Whirlpool WFW560CHW Dimensions, Clearances & Fit Guide

This guide provides all the key measurements for the WFW560CHW washing machine. Review dimensions, clearance requirements, door swing, pedestal and stacking options, and installation notes to ensure a proper fit in your home.

Key Dimensions

Width27 in
Height38.63 in
Depth31.56 in
Depth w/ Door Open 90°52 in
Capacity4.3 cu. ft.
Weight200 lb
ADA CompliantNo
ENERGY STAR® CertifiedYes
Front View Front-Load Washer Dimensions
Side View Front-Load Washer Dimensions

Clearance Requirements

Front View Front-Load Clearance for Washer
Side View Front-Load Clearance for Washer
Front21 in
Sides1 in
Rear5 in
Top1 in
Proper clearance ensures safe operation, reduces vibration, and allows for adequate airflow. Always maintain the minimum space on all sides to prevent overheating and to make servicing easier.

Door Swing & Accessibility

Front-Load washer Door Swing
Door SwingLeft-hinged (non-reversible)
Door Swing Maximum140°
Allow room for full door swing.
Meets ADA accessibility standards.

Pedestal & Stacking Compatibility

Pedestal compatible
Pedestal CompatibleYes
Models
  • WFP2715HW
Stackable compatible
StackableYes
Stacking KitW10869845

Installation Notes

Flooring & Leveling
  • Solid, level surface
  • Concrete preferred
  • Level all four feet
Drain & Plumbing
  • Drain height: 39–96 in
  • High-quality inlet hoses recommended
Electrical
  • 120V 60 Hz AC only
  • 15 amp circuit
  • 3-prong grounded outlet
  • Accessible plug required
Service Access
  • Water supply accessible
  • Drain connection accessible
  • Ensure rear access for water, drain, and electrical

How the WFW560CHW Fits Within Whirlpool’s Lineup

The Whirlpool WFW560CHW is a 4.3 cu. ft. front-load washer in Whirlpool’s 500 Series, positioned as a mid-range model offering strong reliability, ENERGY STAR® efficiency, and a compact depth profile. It fits standard 27-inch laundry spaces and is commonly used in closets, small laundry rooms, and multi-floor installations due to its balanced dimensions and installation flexibility.

FAQ About This Washer

Yes. The washer is 27 in wide, but Whirlpool recommends at least 1 in of clearance on each side.

A minimum depth of 55 in is recommended to accommodate the 52 in door‑open depth and rear clearance.

Yes. It is compatible with the Whirlpool W10869845 stacking kit.

Whirlpool requires a minimum drain height of 39 in and a maximum of 96 in.

Yes. Whirlpool front-load washers include vibration control, but a solid, level floor is strongly recommended.

At least 5 in of rear clearance is recommended for hoses, electrical, and airflow.

Yes, as long as you maintain side, top, and rear clearances and ensure proper ventilation.

No. The door is permanently left-hinged and cannot be reversed.

Many building codes require a drain pan for second-floor laundry rooms; check local regulations.

Copyright 2026. All rights reserved.