Bosch Washer - E16 Error Code

The washer door is not locked or cannot lock.

Meaning

The washer door is not locked or cannot lock.

The Bosch E16, F16, E34, and F34 error codes indicate that the washer door is not properly locked. Bosch washers use an electro-mechanical door lock that must engage before the cycle begins. If the lock mechanism fails to latch, is obstructed, or the control board cannot verify the locked state, the washer displays E16 and prevents operation for safety.

Symptoms

  • Washer will not start a cycle
  • Door does not click or lock
  • E16 or F16 appears immediately after pressing Start
  • Washer beeps repeatedly

Causes

  • Obstructed door latch
  • Faulty door lock actuator
  • Loose wiring to the lock assembly
  • Door not fully closed
🔧

Step-by-Step Fixes

  • Firmly close the door and try again.
  • Inspect the latch area for debris or clothing.
  • Reset the washer by unplugging for 5 minutes.
  • Check the door lock wiring harness if accessible.
⚠️

Safety Notes

  • Never force the door closed—this can damage the lock assembly.
📋

Applicable Models

Show Models
  • WAT28400UC
  • WAT28401UC
  • WGB86200UC
📁

Related Pages

📁

Other Bosch Washer Error Codes

Show All Error Codes

Model-Specific Notes

On the 500 Series platform, the washer will attempt multiple lock retries before displaying E16.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.