Bosch Washer - E17 Error Code

The washer is not filling with water fast enough.

Meaning

The washer is not filling with water fast enough.

The Bosch E17, F17, and F29 error codes indicate that the washer has detected insufficient water flow during the fill cycle. Bosch washers monitor water pressure and flow rate; if the machine cannot reach the required water level within the expected time, it triggers E17 to prevent overheating of the inlet valve and incomplete washing. This issue is commonly caused by clogged inlet screens, low household water pressure, or kinked hoses.

Symptoms

  • Washer takes a long time to fill
  • Washer stops with E17 displayed
  • No water entering the drum
  • Loud buzzing from the inlet valve

Causes

  • Clogged inlet filters
  • Kinked or frozen inlet hoses
  • Low household water pressure
  • Faulty inlet valve
πŸ”§

Step-by-Step Fixes

  • Clean the inlet screens on both hoses.
  • Ensure both hot and cold valves are fully open.
  • Straighten any kinks in the hoses.
  • Check for frozen hoses in cold climates.
⚠️

Safety Notes

  • Turn off water supply before removing hoses.
πŸ“‹

Applicable Models

Show Models
  • WAT28400UC
  • WAT28402UC
  • WGB86200UC
πŸ“

Related Pages

πŸ“

Other Bosch Washer Error Codes

Show All Error Codes

Model-Specific Notes

On the WGB86200UC platform, the washer will retry filling three times before displaying E17.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.