Bosch Washer - E28 Error Code

The washer detected abnormal flow meter readings.

Meaning

The washer detected abnormal flow meter readings.

The Bosch E28 and F28 error codes indicate that the washer’s flow meter is reporting inconsistent or invalid readings. The flow meter measures the exact amount of water entering the washer. If the readings do not match expected values—due to blockages, faulty sensors, or wiring issues—the washer triggers E28 to prevent incorrect water levels and cycle failures.

Symptoms

  • Washer stops filling with E28 displayed
  • Washer fills too slowly or too quickly
  • Cycles take longer than normal
  • Washer drains and refills repeatedly

Causes

  • Faulty flow meter
  • Clogged inlet filters
  • Low household water pressure
  • Loose or damaged wiring
🔧

Step-by-Step Fixes

  • Clean the inlet screens on both hoses.
  • Inspect the flow meter wiring harness.
  • Test the flow meter for proper pulse output.
  • Ensure adequate household water pressure.
⚠️

Safety Notes

  • Turn off water supply before servicing inlet components.
📋

Applicable Models

Show Models
  • WAT28400UC
  • WGB86200UC
📁

Related Pages

📁

Other Bosch Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Bosch 500 Series models, E28 may appear if the flow meter pulse rate drops below the expected threshold during filling.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.