Bosch Washer - Er:02 Error Code

The washer cannot release the door lock.

Meaning

The washer cannot release the door lock.

The Bosch Er:02 error code indicates that the washer attempted to unlock the door at the end of a cycle but the interlock mechanism failed to release. This can occur due to mechanical wear, a jammed latch, or an electrical failure in the lock actuator. In some cases, water remaining in the drum prevents the door from unlocking for safety.

Symptoms

  • Door remains locked after cycle completion
  • Er:02 displayed when attempting to open the door
  • Washer beeps but does not unlock

Causes

  • Mechanical latch jam
  • Faulty door lock actuator
  • Water still present in the drum
  • Loose wiring to the lock assembly
🔧

Step-by-Step Fixes

  • Run a drain/spin cycle to remove remaining water.
  • Unplug the washer for 5 minutes to reset the lock.
  • Inspect the latch area for obstructions.
  • Check wiring to the lock actuator if accessible.
⚠️

Safety Notes

  • Do not force the door open—this can break the lock.
📋

Applicable Models

Show Models
  • WFL2060
  • WFR2460
  • WFMC2100
📁

Related Pages

📁

Other Bosch Washer Error Codes

Show All Error Codes

Model-Specific Notes

On WFR models, Er:02 often appears when the drain pump is partially blocked, preventing the door from unlocking.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.