Bosch Washer - Er:16 Error Code

The washer detected an excessively high water level.

Meaning

The washer detected an excessively high water level.

The Bosch Er:16 error code indicates that the pressure switch detected a water level above the safe threshold. This can be caused by a stuck inlet valve, faulty pressure switch, or blocked pressure hose. To prevent flooding, the washer stops operation and attempts to drain.

Symptoms

  • Washer overfills
  • Water visible near the door glass
  • Er:16 appears during filling

Causes

  • Stuck inlet valve
  • Blocked pressure hose
  • Faulty pressure switch
  • Control board failure
πŸ”§

Step-by-Step Fixes

  • Unplug the washer immediately.
  • Inspect the pressure hose for blockages.
  • Test the inlet valve for proper closure.
  • Replace the pressure switch if defective.
⚠️

Safety Notes

  • Do not continue using the washer if overfilling occurs.
πŸ“‹

Applicable Models

Show Models
  • WFL2060
  • WFR2460
  • WFMC2100
πŸ“

Related Pages

πŸ“

Other Bosch Washer Error Codes

Show All Error Codes

Model-Specific Notes

On WFR models, detergent residue in the pressure hose is a common cause of Er:16.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.