Bosch Washer - Er:20 Error Code

The pressure switch is not responding correctly.

Meaning

The pressure switch is not responding correctly.

The Bosch Er:20 error code indicates that the washerโ€™s pressure switch is not providing valid water level signals to the control module. The pressure switch determines when the washer has filled to the correct level. If the switch sticks, fails to toggle, or sends readings outside the expected range, the washer triggers Er:20 to prevent overfilling, underfilling, or heating without water. This error is common on older Bosch washers where detergent residue or lint can clog the pressure hose.

Symptoms

  • Washer stops mid-cycle with Er:20
  • Washer overfills or underfills
  • Washer drains repeatedly
  • Cycle does not progress to wash or rinse

Causes

  • Blocked or kinked pressure hose
  • Faulty pressure switch
  • Detergent residue in the pressure chamber
  • Loose wiring to the pressure switch
๐Ÿ”ง

Step-by-Step Fixes

  • Inspect the pressure hose for blockages or kinks.
  • Remove the hose and blow through it to confirm it is clear.
  • Check wiring to the pressure switch for corrosion or looseness.
  • Replace the pressure switch if it fails continuity or switching tests.
โš ๏ธ

Safety Notes

  • Disconnect power before servicing internal components.
๐Ÿ“‹

Applicable Models

Show Models
  • WFL2060
  • WFR2460
  • WFMC2100
๐Ÿ“

Related Pages

๐Ÿ“

Other Bosch Washer Error Codes

Show All Error Codes

Model-Specific Notes

On WFL-series washers, Er:20 frequently occurs when the pressure hose becomes partially blocked by detergent residue.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.