Bosch Washer - Tap Icon Error Code

The washer detected a water supply issue.

Meaning

The washer detected a water supply issue.

The Bosch Tap icon indicates that the washer is not receiving water at the expected rate. This symbol replaces traditional error codes on many modern Bosch washers. It appears when the inlet screens are clogged, the household water pressure is low, or the inlet valve is malfunctioning.

Symptoms

  • Washer fills slowly
  • Tap icon appears during fill
  • Washer stops mid-cycle

Causes

  • Clogged inlet filters
  • Kinked or frozen hoses
  • Low household water pressure
  • Faulty inlet valve
πŸ”§

Step-by-Step Fixes

  • Clean the inlet screens.
  • Ensure both water valves are fully open.
  • Straighten any kinks in the hoses.
  • Check for frozen hoses in winter.
⚠️

Safety Notes

  • Turn off water supply before removing hoses.
πŸ“‹

Applicable Models

Show Models
  • WAT28400UC
  • WGB86200UC
πŸ“

Related Pages

πŸ“

Other Bosch Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Bosch i-DOS models, the Tap icon may appear if detergent viscosity interferes with water flow detection.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.