Electrolux Washer - 18 Error Code

The washer did not drain within the expected time.

Meaning

The washer did not drain within the expected time.

Error 18 indicates that the washer failed to drain water within the programmed time. This is similar to Error 03E on PW9C models but uses numeric format for W465H/WH6 washers.

Symptoms

  • Water remains in drum
  • Washer stalls before spin
  • Error 18 appears during rinse or final drain

Causes

  • Blocked drain hose
  • Clogged drain valve or pump
  • Weak pump motor
πŸ”§

Step-by-Step Fixes

  • Inspect drain hose for blockages.
  • Clean drain valve or pump.
  • Test pump motor.
⚠️

Safety Notes

  • Expect water discharge when opening drain components.
πŸ“‹

Applicable Models

Show Models
  • W465H
  • W465H3
  • WH6-14
πŸ“

Related Pages

πŸ“

Other Electrolux Washer Error Codes

Show All Error Codes

Model-Specific Notes

On gravity-drain WH6 models, Error 18 often indicates a stuck drain valve rather than pump failure.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.