Electrolux Washer - 28 Error Code

The washer detected a general underfill condition.

Meaning

The washer detected a general underfill condition.

Error 28 indicates that the washer detected a water level below the minimum required threshold. This is a general underfill error not tied to heating. Underfilling can cause poor wash performance, chemical dosing errors, and mechanical stress.

Symptoms

  • Washer stalls during fill
  • Water level appears low
  • Error 28 appears early in cycle

Causes

  • Low water pressure
  • Blocked inlet filters
  • Faulty pressure sensor
πŸ”§

Step-by-Step Fixes

  • Check facility water pressure.
  • Clean inlet filters.
  • Test pressure sensor.
⚠️

Safety Notes

  • Turn off water before servicing.
πŸ“‹

Applicable Models

Show Models
  • W465H
  • W465H3
  • WH6-10
πŸ“

Related Pages

πŸ“

Other Electrolux Washer Error Codes

Show All Error Codes

Model-Specific Notes

On WH6 models, Error 28 may appear if the inlet hose mesh filter becomes clogged with debris.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.