Electrolux Washer - 3 Error Code

The washer cannot lock the door.

Meaning

The washer cannot lock the door.

Error 3 indicates that the washer attempted to lock the door but the lock mechanism failed to engage. Commercial Electrolux washers require a secure mechanical and electrical lock before starting high‑speed extraction cycles. If the lock actuator or feedback switch fails, the machine stops for safety.

Symptoms

  • Washer will not start
  • Door does not lock
  • Error 3 appears after pressing Start

Causes

  • Faulty door lock actuator
  • Broken latch mechanism
  • Loose wiring
🔧

Step-by-Step Fixes

  • Inspect the latch for damage.
  • Check wiring to the lock actuator.
  • Replace the door lock assembly if defective.
⚠️

Safety Notes

  • Disconnect power before servicing.
📋

Applicable Models

Show Models
  • W465H
  • W465H2
  • W465H4
  • WH6-14
📁

Related Pages

📁

Other Electrolux Washer Error Codes

Show All Error Codes

Model-Specific Notes

On WH6 models, Error 3 may appear after repeated high‑speed cycles loosen the lock actuator mount.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.