Electrolux Washer - 8 Error Code

The washer detected overheating.

Meaning

The washer detected overheating.

Error 8 indicates that the washer detected water temperatures above the safe limit. This typically occurs when the heating element remains energized too long due to a stuck relay, shorted element, or faulty NTC sensor.

Symptoms

  • Water becomes excessively hot
  • Washer stops mid-cycle
  • Error 8 appears during heating

Causes

  • Stuck heating relay
  • Shorted heating element
  • Faulty NTC sensor
πŸ”§

Step-by-Step Fixes

  • Unplug the washer immediately.
  • Test the heating element for shorts.
  • Inspect the control board heating relay.
⚠️

Safety Notes

  • Do not operate the washer until overheating issues are resolved.
πŸ“‹

Applicable Models

Show Models
  • W465H
  • W465H3
  • WH6-20
πŸ“

Related Pages

πŸ“

Other Electrolux Washer Error Codes

Show All Error Codes

Model-Specific Notes

On W465H models, Error 8 may appear if the heater is scaled and overheats rapidly.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.