Electrolux Washer - E11 Error Code

The washer did not fill with water during the wash phase.

Meaning

The washer did not fill with water during the wash phase.

The Electrolux E11 error code indicates that the washer failed to reach the required water level during the wash portion of the cycle. While similar to E10, E11 is specifically tied to the wash fill stage. This can be caused by restricted water flow, clogged inlet filters, or a malfunctioning inlet valve. Some Electrolux models differentiate E10 and E11 to help technicians pinpoint the exact fill stage where the failure occurred.

Symptoms

  • Washer stops early in the wash cycle
  • Drum remains mostly empty
  • E11 displayed shortly after cycle begins

Causes

  • Clogged inlet screens
  • Low water pressure
  • Faulty inlet valve
  • Kinked hoses
πŸ”§

Step-by-Step Fixes

  • Clean inlet filters.
  • Ensure water valves are fully open.
  • Straighten hoses.
  • Test inlet valve solenoids.
⚠️

Safety Notes

  • Disconnect power and water before servicing.
πŸ“‹

Applicable Models

Show Models
  • EFLS627UTT
  • EFLS527UTT
  • EFLW317TIW
  • EIFLS60LT
  • EW6F3143EB
  • EW7F3846QF
  • EWF8024Q5WB
πŸ“

Related Pages

πŸ“

Other Electrolux Washer Error Codes

Show All Error Codes

Model-Specific Notes

On EU PerfectCare models, E11 may appear if the AutoDose system delays water intake.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.