Frigidaire Washer - E35 Error Code

The washer detected an excessively high water level.

Meaning

The washer detected an excessively high water level.

The Frigidaire E35 error code indicates that the pressure sensor detected a water level above the safe threshold. This is an overfill condition and is one of the most serious water‑level errors. The washer will immediately stop filling and attempt to drain to prevent flooding.

Symptoms

  • Washer overfills
  • Water visible near the door glass
  • E35 appears during fill or wash

Causes

  • Stuck inlet valve
  • Blocked pressure hose
  • Faulty pressure sensor
🔧

Step-by-Step Fixes

  • Unplug the washer immediately.
  • Inspect the pressure hose for blockages.
  • Test the inlet valve for proper closure.
  • Replace the pressure sensor if defective.
⚠️

Safety Notes

  • Do not continue using the washer if overfilling occurs.
📋

Applicable Models

Show Models
  • FAFS4272LW
  • FAFW3801LW
  • ATF6000FS
  • GLTF2940FS
📁

Related Pages

📁

Other Frigidaire Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Affinity washers, E35 often appears when the inlet valve sticks open due to mineral buildup.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.