Frigidaire Washer - E41 Error Code

The washer thinks the door is open.

Meaning

The washer thinks the door is open.

The Frigidaire E41 error code indicates that the washer believes the door is open even when it appears closed. The control board checks a door‑switch feedback signal; if it does not detect a locked state, the washer will not start or continue the cycle. This is one of the most common Frigidaire door‑related errors and can be caused by a misaligned latch, weak door‑lock switch, or wiring issues.

Symptoms

  • Washer will not start
  • Door appears closed but not detected as locked
  • E41 appears immediately after pressing Start

Causes

  • Door not fully closed
  • Faulty door‑lock switch
  • Loose wiring to the lock assembly
🔧

Step-by-Step Fixes

  • Close the door firmly until the latch clicks.
  • Inspect the latch for debris or misalignment.
  • Check wiring to the door‑lock assembly.
⚠️

Safety Notes

  • Do not force the door closed.
📋

Applicable Models

Show Models
  • FAFS4272LW
  • FAFW3801LW
  • ATF6000FS
  • GLTF2940FS
  • FFTW4120SW
📁

Related Pages

📁

Other Frigidaire Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Affinity washers, E41 often appears when the door‑strike plastic wears down and no longer engages the lock fully.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.