Frigidaire Washer - E44 Error Code

The washer is receiving invalid feedback from the door‑lock switch.

Meaning

The washer is receiving invalid feedback from the door‑lock switch.

The Frigidaire E44 error code indicates that the control board is receiving contradictory or invalid signals from the door‑lock feedback switch. The washer expects a specific locked/unlocked signal; if the feedback does not match the lock state, E44 is triggered. This typically points to a failing door‑lock assembly.

Symptoms

  • Washer will not start
  • Door lock engages but feedback is incorrect
  • E44 appears during startup

Causes

  • Faulty door‑lock feedback switch
  • Loose wiring
  • Control board input fault
🔧

Step-by-Step Fixes

  • Inspect wiring to the door‑lock assembly.
  • Replace the door‑lock assembly if feedback is unstable.
  • Test control board input if lock tests good.
⚠️

Safety Notes

  • Disconnect power before servicing.
📋

Applicable Models

Show Models
  • FAFS4272LW
  • FAFW3801LW
  • ATF6000FS
📁

Related Pages

📁

Other Frigidaire Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Affinity washers, E44 often appears when the lock’s micro‑switch wears out from repeated high‑heat cycles.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.