Frigidaire Washer - E64 Error Code

The washer detected an open circuit in the heating element.

Meaning

The washer detected an open circuit in the heating element.

The Frigidaire E64 error code indicates that the heating element is not drawing current because it is open (broken) or disconnected. The washer monitors heater load during heating; if no current is detected, E64 is triggered. This is one of the most common heating failures on Affinity washers.

Symptoms

  • Washer does not heat
  • Cycles take longer than normal
  • E64 appears during wash

Causes

  • Burned‑out heating element
  • Loose wiring to the heater
  • Broken heater terminals
🔧

Step-by-Step Fixes

  • Test the heating element for continuity.
  • Inspect wiring and terminals.
  • Replace the heater if open.
⚠️

Safety Notes

  • Disconnect power before servicing the heater.
📋

Applicable Models

Show Models
  • FAFS4272LW
  • FAFW3801LW
  • ATF6000FS
📁

Related Pages

📁

Other Frigidaire Washer Error Codes

Show All Error Codes

Model-Specific Notes

On Affinity washers, E64 is extremely common due to heater burnout from mineral buildup.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.