Frigidaire Washer - ERS Error Code

The washer detected a motor speed sensor fault.

Meaning

The washer detected a motor speed sensor fault.

The Frigidaire ERS error code indicates that the washerโ€™s motor speed sensor (tachometer) is not sending valid signals. The control board uses tachometer feedback to regulate drum speed. If the signal is missing, unstable, or contradictory, ERS is triggered. This is one of the most common motor-related errors on older Frigidaire washers.

Symptoms

  • Washer stops during spin
  • Drum speed fluctuates
  • ERS appears during acceleration

Causes

  • Faulty tachometer
  • Loose wiring to the motor
  • Motor control board failure
๐Ÿ”ง

Step-by-Step Fixes

  • Inspect tachometer wiring.
  • Test the tachometer for correct resistance.
  • Replace the motor if the tachometer is defective.
โš ๏ธ

Safety Notes

  • Disconnect power before servicing motor components.
๐Ÿ“‹

Applicable Models

Show Models
  • GLTF2940ES
  • LTF2140FS
  • ATF6000FS
๐Ÿ“

Related Pages

๐Ÿ“

Other Frigidaire Washer Error Codes

Show All Error Codes

Model-Specific Notes

On GLTF washers, ERS often appears when the motor bearings begin to wear, causing erratic tachometer readings.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.