Haier Washer - FA Error Code
The washer detected a water level sensor circuit problem.
Meaning
The washer detected a water level sensor circuit problem.
The Haier FA error code indicates that the washer’s water‑level sensor circuit is malfunctioning. This may include shorted wiring, open circuits, or corrupted sensor feedback. FA is more severe than F4 because it indicates a circuit‑level failure rather than a simple sensor reading issue.
Symptoms
Causes
Step-by-Step Fixes
- Inspect wiring harness for damage.
- Test continuity of the pressure sensor circuit.
- Replace control board if necessary.
Safety Notes
- Disconnect power before servicing electronics.
Applicable Models
Show Models
- Haier HLC1700AXW
- Haier HLC1700AXS
Related Pages
Other Haier Washer Error Codes
Show All Error Codes
- Haier Washer CLRF Error Code
- Haier Washer E1 Error Code
- Haier Washer E10 Error Code
- Haier Washer E11 Error Code
- Haier Washer E12 Error Code
- Haier Washer E13 Error Code
- Haier Washer E2 Error Code
- Haier Washer E4 Error Code
- Haier Washer E8 Error Code
- Haier Washer Err1 Error Code
- Haier Washer Err2 Error Code
- Haier Washer Err3 Error Code
- Haier Washer Err4 Error Code
- Haier Washer Err5 Error Code
- Haier Washer Err6 Error Code
- Haier Washer Err7 Error Code
- Haier Washer Err8 Error Code
- Haier Washer Err9 Error Code
- Haier Washer F3 Error Code
- Haier Washer F4 Error Code
- Haier Washer F7 Error Code
- Haier Washer F9 Error Code
- Haier Washer FC Error Code
- Haier Washer FC0 Error Code
- Haier Washer FC1 Error Code
- Haier Washer FC2 Error Code
- Haier Washer Fd Error Code
- Haier Washer FE Error Code
- Haier Washer H Error Code
- Haier Washer U3 Error Code
- Haier Washer Unb Error Code
Model-Specific Notes
FA often appears when the pressure sensor hose leaks and moisture enters the wiring connector.
Disclaimer
The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.