Haier Washer - FE Error Code
The dryer motor is not operating normally.
Meaning
The dryer motor is not operating normally.
The Haier FE error code indicates that the dryer motor in a combo washer/dryer unit is not functioning correctly. The dryer motor drives airflow through the condenser system. If the motor fails to start, runs slowly, or draws abnormal current, the washer triggers FE to prevent overheating and poor drying performance.
Symptoms
Causes
Step-by-Step Fixes
- Inspect the blower wheel for obstructions.
- Test the dryer motor for correct operation.
- Check wiring to the motor and control board.
- Clean internal airflow channels.
Safety Notes
- Disconnect power before servicing the dryer motor.
Applicable Models
Show Models
- Haier HLC1700AXW
- Haier HLC1700AXS
Related Pages
Other Haier Washer Error Codes
Show All Error Codes
- Haier Washer CLRF Error Code
- Haier Washer E1 Error Code
- Haier Washer E10 Error Code
- Haier Washer E11 Error Code
- Haier Washer E12 Error Code
- Haier Washer E13 Error Code
- Haier Washer E2 Error Code
- Haier Washer E4 Error Code
- Haier Washer E8 Error Code
- Haier Washer Err1 Error Code
- Haier Washer Err2 Error Code
- Haier Washer Err3 Error Code
- Haier Washer Err4 Error Code
- Haier Washer Err5 Error Code
- Haier Washer Err6 Error Code
- Haier Washer Err7 Error Code
- Haier Washer Err8 Error Code
- Haier Washer Err9 Error Code
- Haier Washer F3 Error Code
- Haier Washer F4 Error Code
- Haier Washer F7 Error Code
- Haier Washer F9 Error Code
- Haier Washer FA Error Code
- Haier Washer FC Error Code
- Haier Washer FC0 Error Code
- Haier Washer FC1 Error Code
- Haier Washer FC2 Error Code
- Haier Washer Fd Error Code
- Haier Washer H Error Code
- Haier Washer U3 Error Code
- Haier Washer Unb Error Code
Model-Specific Notes
FE often appears when lint buildup causes the blower wheel to jam or the motor to overheat.
Disclaimer
The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.