Kenmore Washer - F01 Error Code

Control board EEPROM failure.

Meaning

Control board EEPROM failure.

The F01 error indicates that the washer’s main control board has experienced an EEPROM failure. Kenmore explains that this code appears when the control board cannot read or write internal memory, often due to power surges, corrupted firmware, or failing onboard components. When F01 is active, the washer may not start, may freeze mid‑cycle, or may fail to respond to button inputs.

Symptoms

  • Washer will not start and displays F01
  • Washer powers on but does not respond
  • Cycle freezes unexpectedly
  • Buttons become unresponsive
  • Washer repeatedly resets or clicks

Causes

  • Corrupted EEPROM on the control board
  • Power surge or voltage spike
  • Loose control board connectors
  • Moisture intrusion into the console
🔧

Step-by-Step Fixes

  • Unplug the washer for 5 minutes to reset the board.
  • Inspect the control board for burn marks or corrosion.
  • Ensure all wiring harnesses are fully seated.
  • Replace the control board if the error persists.
⚠️

Safety Notes

  • Disconnect power before accessing the control console.
  • Avoid touching exposed circuitry without proper precautions.
📋

Applicable Models

Show Models
  • Kenmore HE2 Front‑Load: 110.46462500, 110.46462501
  • Kenmore HE3 Front‑Load: 110.42822200, 110.42824200
  • Kenmore HE3t Front‑Load: 110.44932200, 110.44934200
  • Kenmore HE4t Front‑Load: 110.45081400, 110.45087400
  • Kenmore HE5t Front‑Load: 110.47081600, 110.47087600
  • Kenmore HE5 Elite: 110.47751800, 110.47761800
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

HE3/HE4/HE5 models are particularly prone to F01 after power outages or lightning storms due to sensitive EEPROM architecture.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.