Kenmore Washer - F06 Error Code

Motor tachometer or speed sensor failure.

Meaning

Motor tachometer or speed sensor failure.

The F06 error indicates that the washer’s control board is not receiving proper speed feedback from the motor tachometer. Kenmore explains that this code appears when the motor cannot maintain or report correct speed, often due to wiring issues, a failing tachometer, or a defective motor control board.

Symptoms

  • Washer stops during spin
  • Drum speed fluctuates unexpectedly
  • Washer will not enter high‑speed spin
  • F06 appears shortly after cycle start

Causes

  • Loose or damaged motor wiring
  • Faulty tachometer sensor
  • Worn motor brushes (older models)
  • Defective motor control board
🔧

Step-by-Step Fixes

  • Inspect motor wiring harness for damage.
  • Check tachometer resistance values.
  • Replace the motor if tachometer is faulty.
  • Replace the motor control board if no tach signal is detected.
⚠️

Safety Notes

  • Disconnect power before accessing the motor assembly.
📋

Applicable Models

Show Models
  • Kenmore HE3: 110.42822200, 110.42824200
  • Kenmore HE3t: 110.44932200, 110.44934200
  • Kenmore HE4t: 110.45081400, 110.45087400
  • Kenmore HE5t: 110.47081600, 110.47087600
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

HE3/HE4/HE5 models use a tachometer ring integrated into the motor, making wiring issues a common cause of F06.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.