Kenmore Washer - F22 Error Code

Washer door failed to lock.

Meaning

Washer door failed to lock.

The F22 error indicates that the washer’s door lock mechanism failed to engage. Kenmore explains that this code appears when the control board does not receive the locked signal within the expected time. This may occur due to a faulty door lock assembly, misaligned door latch, or wiring issues.

Symptoms

  • Washer will not start and displays F22
  • Door does not lock when cycle begins
  • Clicking sounds from the lock mechanism
  • Cycle cancels immediately after starting

Causes

  • Failed door lock assembly
  • Misaligned door latch
  • Loose or damaged wiring
  • Control board not sending lock signal
🔧

Step-by-Step Fixes

  • Inspect the door latch for alignment.
  • Check wiring harness connections to the lock.
  • Replace the door lock assembly if defective.
  • Replace the control board if lock signal is absent.
⚠️

Safety Notes

  • Disconnect power before servicing the door lock.
📋

Applicable Models

Show Models
  • Kenmore HE2: 110.46462500
  • Kenmore HE3: 110.42822200
  • Kenmore HE3t: 110.44932200
  • Kenmore HE4t: 110.45081400
  • Kenmore HE5t: 110.47081600
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F22 is extremely common on HE3/HE4 models due to latch wear and vibration‑related connector fatigue.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.