Kenmore Washer - F44 Error Code

Motor stalled during operation.

Meaning

Motor stalled during operation.

The F44 error indicates that the washer’s drive motor stalled during agitation or spin. Kenmore explains that this code appears when the motor cannot rotate freely due to mechanical binding, seized bearings, foreign objects between the tub and basket, or internal motor failure. The washer halts operation to prevent overheating or electrical damage.

Symptoms

  • Washer stops mid‑cycle with F44 displayed
  • Drum does not rotate during wash or spin
  • Grinding or humming noises
  • Washer attempts to start but immediately stops

Causes

  • Seized drum bearings
  • Foreign objects trapped between tub and basket
  • Failed drive motor
  • Faulty motor control board
🔧

Step-by-Step Fixes

  • Rotate the drum by hand to check for binding.
  • Inspect for foreign objects around the basket.
  • Test motor windings for correct resistance.
  • Replace the motor or MCU if defective.
⚠️

Safety Notes

  • Disconnect power before servicing the motor or MCU.
📋

Applicable Models

Show Models
  • Kenmore HE3t: 110.44932200, 110.44934200
  • Kenmore HE4t: 110.45081400, 110.45087400
  • Kenmore HE5t: 110.47081600, 110.47087600
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F44 frequently appears when socks or small garments slip between the tub and basket, causing mechanical binding.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.