Kenmore Washer - F54 Error Code

Motor relay failure on control board.

Meaning

Motor relay failure on control board.

The F54 error indicates that the washerโ€™s main control board detected a failure in the motor relay circuit. Kenmore explains that this code appears when the relay cannot energize the motor or becomes stuck in the open or closed position. This prevents the washer from agitating or spinning.

Symptoms

  • Washer will not agitate or spin
  • Washer displays F54 immediately after starting
  • Clicking sounds from the control board

Causes

  • Failed motor relay
  • Burned relay contacts
  • Control board circuit damage
  • Loose wiring to the motor
๐Ÿ”ง

Step-by-Step Fixes

  • Inspect wiring to the motor.
  • Check the control board for burn marks or heat damage.
  • Replace the main control board if the relay is defective.
โš ๏ธ

Safety Notes

  • Disconnect power before accessing the control board.
๐Ÿ“‹

Applicable Models

Show Models
  • Kenmore HE4t: 110.45081400
  • Kenmore HE5t: 110.47081600
  • Kenmore HE5 Elite: 110.47751800
๐Ÿ“

Related Pages

๐Ÿ“

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F54 is often caused by overheating or arcing inside the motor relay due to heavy loads or aging components.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.