Kenmore Washer - F6E1 Error Code

ACU cannot detect motor.

Meaning

ACU cannot detect motor.

The F6E1 error indicates that the appliance control unit (ACU) cannot detect the washer’s drive motor. Kenmore explains that this code appears when the ACU receives no electrical feedback from the motor windings or tachometer.

Symptoms

  • Washer will not agitate or spin
  • F6E1 appears immediately when cycle starts
  • Motor does not hum or attempt to move

Causes

  • Unplugged or damaged motor harness
  • Failed drive motor
  • Open motor windings
  • ACU motor driver failure
🔧

Step-by-Step Fixes

  • Inspect motor wiring harness.
  • Test motor windings for continuity.
  • Replace motor if defective.
  • Replace ACU if motor tests good.
⚠️

Safety Notes

  • Disconnect power before servicing motor or ACU.
📋

Applicable Models

Show Models
  • Kenmore Oasis HE: 110.27062600
  • Kenmore HE Top‑Load: 110.28102310
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F6E1 is common when the motor harness vibrates loose over time.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.