Kenmore Washer - F7E1 Error Code

Basket speed sensor failure.

Meaning

Basket speed sensor failure.

The F7E1 error indicates that the washer’s basket speed sensor is not detecting proper rotation. Kenmore explains that this code appears when the washer cannot reach or maintain the expected spin speed. This may occur due to a failed speed sensor, wiring issues, a faulty shifter mechanism, or a failing drive motor. When F7E1 is active, the washer will not enter high‑speed spin and may stop mid‑cycle.

Symptoms

  • Washer will not spin
  • Washer stops mid‑cycle with F7E1 displayed
  • Drum rotates slowly or inconsistently
  • Washer hums but does not accelerate into spin
  • Cycle ends with clothes still wet

Causes

  • Failed basket speed sensor
  • Loose or damaged wiring to the motor or shifter
  • Faulty drive motor
  • Shifter mechanism stuck between modes
  • Motor control board not detecting RPM feedback
🔧

Step-by-Step Fixes

  • Inspect wiring harness to the motor and shifter.
  • Check the shifter mechanism for proper movement.
  • Test the basket speed sensor for correct resistance.
  • Replace the shifter or motor if defective.
  • Replace the motor control board if RPM feedback is absent.
⚠️

Safety Notes

  • Disconnect power before servicing the motor or shifter assembly.
  • Avoid running the washer if burning smells or grinding noises are present.
📋

Applicable Models

Show Models
  • Kenmore Oasis HE: 110.27062600, 110.27067600
  • Kenmore HE Top‑Load: 110.28102310, 110.28102311
  • Kenmore 500 Series: 110.25132411
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F7E1 is extremely common on Oasis HE and Cabrio‑platform Kenmore models when the shifter mechanism begins to fail, preventing the washer from detecting correct basket speed.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.