Kenmore Washer - F7E5 Error Code

Shifter mechanism failure.

Meaning

Shifter mechanism failure.

The F7E5 error indicates that the washer’s shifter mechanism is not moving correctly between agitate and spin modes. Kenmore explains that this code appears when the control board detects improper shifter position feedback or mechanical binding. When F7E5 is active, the washer may not agitate or spin properly.

Symptoms

  • Washer will not agitate or spin
  • Grinding or clicking noises from the lower area
  • Washer stops mid‑cycle with F7E5 displayed
  • Drum rotates inconsistently

Causes

  • Failed shifter actuator
  • Mechanical binding in the splutch assembly
  • Loose or damaged wiring to the shifter
  • Motor control board not detecting shifter position
🔧

Step-by-Step Fixes

  • Inspect wiring harness to the shifter.
  • Check splutch assembly for binding or debris.
  • Replace the shifter actuator if defective.
  • Replace splutch assembly if worn or seized.
⚠️

Safety Notes

  • Disconnect power before servicing the shifter or motor assembly.
📋

Applicable Models

Show Models
  • Kenmore Oasis HE: 110.27062600, 110.27067600
  • Kenmore HE Top‑Load: 110.28102310, 110.28102311
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F7E5 is one of the most common failures on Oasis HE models due to splutch wear and actuator motor fatigue.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.