Kenmore Washer - F7E6 Error Code

Motor fault detected.

Meaning

Motor fault detected.

The F7E6 error indicates that the washer’s motor is not operating correctly. Kenmore explains that this code appears when the motor control board detects abnormal current draw, open windings, or failure to rotate. When F7E6 is active, the washer may not agitate or spin.

Symptoms

  • Washer will not agitate or spin
  • Humming or buzzing from motor
  • Washer stops mid‑cycle with F7E6 displayed

Causes

  • Failed drive motor
  • Open or shorted motor windings
  • Loose or damaged wiring
  • Motor control board failure
🔧

Step-by-Step Fixes

  • Inspect wiring harness to the motor.
  • Test motor windings for correct resistance.
  • Replace motor if defective.
  • Replace motor control board if motor tests good.
⚠️

Safety Notes

  • Disconnect power before servicing the motor.
📋

Applicable Models

Show Models
  • Kenmore Oasis HE: 110.27062600
  • Kenmore HE Top‑Load: 110.28102310
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F7E6 often appears when the motor begins drawing excessive current due to bearing wear.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.