Kenmore Washer - F8E1 Error Code

Washer taking too long to fill.

Meaning

Washer taking too long to fill.

The F8E1 error indicates that the washer did not reach the expected water level within the programmed time. Kenmore explains that this code appears when water flow is restricted or inlet valves fail to open properly.

Symptoms

  • Washer fills very slowly
  • F8E1 appears mid‑cycle
  • Cycle does not progress past fill

Causes

  • Closed or partially closed household valves
  • Kinked or clogged inlet hoses
  • Clogged inlet valve screens
  • Failed inlet valve solenoids
🔧

Step-by-Step Fixes

  • Ensure both hot and cold valves are fully open.
  • Inspect hoses for kinks or blockages.
  • Clean inlet valve screens.
  • Replace inlet valve assembly if defective.
⚠️

Safety Notes

  • Turn off water supply before removing hoses.
📋

Applicable Models

Show Models
  • Kenmore Oasis HE: 110.27062600
  • Kenmore HE Top‑Load: 110.28102310
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F8E1 is especially common in rural areas with sediment‑heavy water supplies.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.