Kenmore Washer - F9E2 Error Code

Drain pump electrical problem.

Meaning

Drain pump electrical problem.

The F9E2 error indicates that the washer detected an electrical problem with the drain pump. Kenmore explains that this code appears when the pump draws too much or too little current, fails to energize, or reports an open or shorted circuit.

Symptoms

  • Washer will not drain
  • Washer stops mid‑cycle with F9E2
  • Pump hums but does not move water

Causes

  • Failed drain pump motor
  • Open or shorted pump windings
  • Loose or damaged wiring
  • Debris causing pump to stall
🔧

Step-by-Step Fixes

  • Inspect wiring harness to pump.
  • Check pump for debris or blockage.
  • Test pump windings for correct resistance.
  • Replace pump if defective.
⚠️

Safety Notes

  • Disconnect power before servicing the pump.
📋

Applicable Models

Show Models
  • Kenmore Oasis HE: 110.27062600
  • Kenmore HE Top‑Load: 110.28102310
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F9E2 is extremely common when coins or debris jam the pump impeller, causing electrical overload.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.