Kenmore Washer - F9E3 Error Code

Overflow condition; drain pump running continuously.

Meaning

Overflow condition; drain pump running continuously.

The F9E3 error indicates that the washer detected an overflow condition and activated the drain pump continuously. Kenmore explains that this code appears when the pressure sensor reports water levels above the safe threshold.

Symptoms

  • Drain pump runs nonstop
  • Washer will not fill
  • F9E3 appears immediately

Causes

  • Stuck inlet valve causing overfill
  • Blocked pressure hose
  • Faulty pressure sensor
  • Siphoning due to incorrect drain installation
๐Ÿ”ง

Step-by-Step Fixes

  • Inspect inlet valves for sticking.
  • Check pressure hose for blockages.
  • Verify standpipe height.
  • Replace pressure sensor if defective.
โš ๏ธ

Safety Notes

  • Turn off water supply before servicing valves.
๐Ÿ“‹

Applicable Models

Show Models
  • Kenmore HE Topโ€‘Load: 110.28102310
๐Ÿ“

Related Pages

๐Ÿ“

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

F9E3 is common when siphoning occurs due to low or improperly installed standpipes.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.