Kenmore Washer - LD Error Code

Washer is taking too long to drain.

Meaning

Washer is taking too long to drain.

The LD error indicates that the washer has exceeded the maximum drain time. Kenmore explains that this code appears when the washer cannot remove water quickly enough, typically due to a blocked drain hose, clogged pump, or siphoning issues.

Symptoms

  • Washer stops mid‑cycle with LD displayed
  • Water remains in the tub
  • Washer repeatedly attempts to drain
  • Cycle stalls before spin

Causes

  • Blocked or kinked drain hose
  • Clogged drain pump
  • Improper drain installation causing siphoning
  • Weak or failing drain pump motor
🔧

Step-by-Step Fixes

  • Inspect the drain hose for blockages or kinks.
  • Check the pump for debris.
  • Ensure standpipe height meets installation requirements.
  • Replace the drain pump if necessary.
⚠️

Safety Notes

  • Disconnect power before servicing the pump.
📋

Applicable Models

Show Models
  • Kenmore Oasis HE: 110.27062600, 110.27067600
  • Kenmore HE Top‑Load: 110.28102310, 110.28102311
  • Kenmore 500 Series: 110.25132411
  • Kenmore 600 Series: 110.28133410
📁

Related Pages

📁

Other Kenmore Washer Error Codes

Show All Error Codes

Model-Specific Notes

LD is extremely common on Oasis HE models when lint accumulates in the pump housing.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.