LG Washer - IE Error Code
The washer is not filling with water properly.
Meaning
The washer is not filling with water properly.
The LG IE error code indicates that the washer did not reach the required water level within the expected time. This code is used across all LG Direct‑Drive washers in North America.
Symptoms
Causes
Step-by-Step Fixes
- Open both supply valves.
- Clean inlet screens.
- Straighten hoses.
- Check pressure.
- Replace inlet valve if needed.
Safety Notes
- Turn off water before removing hoses.
Applicable Models
Show Models
- [Giant-C Giant-V Titan-C Titan-V]
- map[front-load direct-drive:[WM2101HW WM2487HRM WM2501HVA WM2701HV WM3050CW WM3070HWA WM3170CW WM3370HWA WM3470HVA WM3500CW WM3550HVA WM3570HVA WM3600HWA WM3700HWA WM3800HBA WM3900HWA WM4000HWA WM4000HBA WM4200HWA WM4500HBA WM5000HVA WM5100HVA WM5500HVA WM6500HWA WM6700HBA WM8100HVA WM9000HVA] top-load direct-drive:[WT1101CW WT1201CV WT1501CW WT1701CV WT1901CW WT7100CW WT7200CW WT7300CW WT7400CV WT7500CW WT7800CW WT7900HBA WT7150CW WT7405CW WT8100HVA WT8200CV WT8400CV WT8600HVA]]
Related Pages
- LG Washer OE – The washer cannot drain water within the expected time.
- LG Washer UE – The washer detected an unbalanced load.
- LG Washer dE – The washer door or lid is not locking properly.
- LG Washer LE – The washer detected a locked or stalled motor.
- LG Washer PE – The washer detected a water level sensor fault.
Other LG Washer Error Codes
Show All Error Codes
- LG Washer CE Error Code — Overcurrent Error
- LG Washer dE Error Code — Door Error
- LG Washer FE Error Code — Overflow Error
- LG Washer LE Error Code — Motor Locked
- LG Washer OE Error Code — Drain Error
- LG Washer PE Error Code — Pressure Sensor Error
- LG Washer SE Error Code — Motor Sensor Error
- LG Washer tE Error Code — Thermistor Error
- LG Washer UE Error Code — Unbalanced Load
Model-Specific Notes
- ThinQ models may show “Water supply error” instead of IE. - Top-load models rely heavily on pressure-sensor accuracy.
Disclaimer
The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.