LG Washer - tE Error Code
The washer detected a temperature sensor fault.
Meaning
The washer detected a temperature sensor fault.
The LG tE error code indicates that the washer’s thermistor (water temperature sensor) is reading out of range. This code appears on LG Direct‑Drive front‑load and top‑load models in North America.
Symptoms
Causes
Step-by-Step Fixes
- Inspect thermistor wiring.
- Test thermistor resistance.
- Replace thermistor if out of spec.
- Check heater circuit on models with internal heaters.
Safety Notes
- Unplug washer before accessing internal components.
Applicable Models
Show Models
- [Giant-C Giant-V]
- map[front-load direct-drive:[WM3050CW WM3070HWA WM3170CW WM3370HWA WM3470HVA WM3500CW WM3570HVA WM3600HWA WM3700HWA WM3800HBA WM3900HWA WM4000HWA WM4200HWA WM4500HBA] top-load direct-drive:[WT7100CW WT7200CW WT7300CW WT7400CV WT7500CW WT7800CW]]
Related Pages
Other LG Washer Error Codes
Show All Error Codes
- LG Washer CE Error Code — Overcurrent Error
- LG Washer dE Error Code — Door Error
- LG Washer FE Error Code — Overflow Error
- LG Washer IE Error Code — Water Inlet Error
- LG Washer LE Error Code — Motor Locked
- LG Washer OE Error Code — Drain Error
- LG Washer PE Error Code — Pressure Sensor Error
- LG Washer SE Error Code — Motor Sensor Error
- LG Washer UE Error Code — Unbalanced Load
Model-Specific Notes
- Some NA models use tE1/tE2 for more specific thermistor faults. - Models with internal heaters are more prone to tE if scaling occurs.
Disclaimer
The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.