LG Washer - VS Error Code
The washer detected an abnormal vibration sensor signal.
Meaning
The washer detected an abnormal vibration sensor signal.
The LG VS error code appears on select North American **top‑load Direct‑Drive washers** equipped with a vibration sensor module. The vibration sensor monitors tub oscillation and vibration patterns during spin. VS indicates that the sensor signal is missing, unstable, or outside the expected range. This code does **not** appear on front‑load WM models.
Symptoms
Causes
Step-by-Step Fixes
- Power cycle the washer.
- Inspect vibration sensor wiring under the tub.
- Check for loose or damaged connectors.
- Inspect suspension rods for wear.
- Replace vibration sensor if faulty.
Safety Notes
- Unplug the washer before servicing.
- Avoid running the washer with severe vibration.
Applicable Models
Show Models
- map[top-load direct-drive (vs-capable models):[WT7300CW WT7300CV WT7400CV WT7500CW WT7800CW WT7900HBA]]
Related Pages
- LG Washer UB – The washer detected an unbalanced load.
- LG Washer UE – The washer detected an unbalanced load.
- LG Washer UE1 – The washer detected an unbalanced load (variant of UE).
- LG Washer OE – The washer cannot drain water within the expected time.
- LG Washer PF1 – The washer detected an abnormal power interruption.
Other LG Washer Error Codes
Show All Error Codes
- LG Washer AC/AE Error Code — Communication Error
- LG Washer AE6 Error Code — Wi‑Fi Module Communication Error
- LG Washer CE Error Code — Overcurrent Error
- LG Washer CL Indicator — Child Lock Activated
- LG Washer dE Error Code — Door Error
- LG Washer dE1 Error Code — Door Not Locked
- LG Washer dE2 Error Code — Door Open
- LG Washer dE3 Error Code — Door Lock Failure
- LG Washer dHE Error Code — Door Heating Error
- LG Washer dL Error Code — Door Lock Failure (Modern Front‑Load Models)
- LG Washer DL Error Code — Lid Lock Failure (Legacy Top‑Load Models)
- LG Washer DR Error Code — Door/Lid Open During Cycle (Legacy Models)
- LG Washer E6 Error Code — Motor Triac Error
- LG Washer E7 Error Code — Hall Sensor Signal Error
- LG Washer FE Error Code — Overflow Error
- LG Washer HE Error Code — Heater Error
- LG Washer HE1 Error Code — Heater Overheat
- LG Washer HE2 Error Code — Heater Underheat
- LG Washer IE Error Code — Water Inlet Error
- LG Washer IE1 Error Code — Water Inlet Variant
- LG Washer LE Error Code — Motor Locked
- LG Washer LE1 Error Code — Water Leak Detected
- LG Washer OE Error Code — Drain Error
- LG Washer OE1 Error Code — Drain Fault Variant
- LG Washer OE2 Error Code — Drain Pump Overrun
- LG Washer OE3 Error Code — Drain Pump Blocked
- LG Washer PE Error Code — Pressure Sensor Error
- LG Washer PE1 Error Code — Pressure Sensor Variant
- LG Washer PF Error Code — Power Failure
- LG Washer PF1 Error Code — Power Failure Variant
- LG Washer SE Error Code — Motor Sensor Error
- LG Washer SUD Error Code — Excessive Suds
- LG Washer tCL Indicator — Tub Clean Reminder
- LG Washer tE Error Code — Thermistor Error
- LG Washer tE1 Error Code — Thermistor Short
- LG Washer tE2 Error Code — Thermistor Open
- LG Washer tE3 Error Code — Thermistor Variant
- LG Washer UB Error Code — Unbalanced Load (ThinQ Variant)
- LG Washer UE Error Code — Unbalanced Load
- LG Washer UE1 Error Code — Unbalance Variant
Model-Specific Notes
- VS appears only on top-load models equipped with a vibration sensor module. - Front-load WM models do not use VS; they use UE/UE1/UB instead. - Suspension rod wear can cause false VS triggers.
Disclaimer
The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.