What are the symptoms of error code F0E1 (Front-Load)?

Clean Washer cycle will not start, Cycle stops shortly after beginning, F0E1 appears immediately when the cycle is selected, Washer prompts user to remove items from the drum

What causes error code F0E1 (Front-Load)?

Clothing or items left inside the drum, Small items trapped between the drum and door boot, User accidentally selected Clean Washer instead of a normal cycle, Sensor misread due to heavy residue buildup (rare)

How do I fix error code F0E1 (Front-Load)?

Open the washer door and remove all clothing or items from the drum., Check the door boot for small trapped items such as socks or washcloths., Restart the Clean Washer cycle with the drum completely empty., If the error persists with an empty drum, run a normal cycle to verify drum movement., Clean the washer thoroughly if residue buildup is suspected.

Maytag Washer - F0E1 (Front-Load) Error Code

Load detected during Clean Washer cycle.

Meaning

Load detected during Clean Washer cycle.

The Maytag F0E1 error code on front-load washers indicates that the appliance control unit (ACU) detected clothing or other items inside the drum during the Clean Washer cycle. Whirlpool-built Maytag front-load washers require an empty drum for this maintenance cycle so the washer can reach the correct water levels, temperatures, and tumbling patterns. If the drum is not empty, the ACU stops the cycle and displays F0E1 to prevent damage and ensure proper cleaning of the tub interior.

Symptoms

Clean Washer cycle will not start
Cycle stops shortly after beginning
F0E1 appears immediately when the cycle is selected
Washer prompts user to remove items from the drum

Causes

Clothing or items left inside the drum
Small items trapped between the drum and door boot
User accidentally selected Clean Washer instead of a normal cycle
Sensor misread due to heavy residue buildup (rare)

🔧

Step-by-Step Fixes

Open the washer door and remove all clothing or items from the drum.
Check the door boot for small trapped items such as socks or washcloths.
Restart the Clean Washer cycle with the drum completely empty.
If the error persists with an empty drum, run a normal cycle to verify drum movement.
Clean the washer thoroughly if residue buildup is suspected.

⚠️

Safety Notes

Do not attempt to run the Clean Washer cycle with items inside the drum.
Avoid using excessive detergent, as residue can interfere with cycle detection.

📋

Applicable Models

Show Models

MHW3000 Series: MHW3000BW, MHW3100DW
MHW3500 Series: MHW3500FW, MHW3505FW
MHW4200 Series: MHW4200BW
MHW4300 Series: MHW4300DW
MHW5100 Series: MHW5100DW
MHW5500 Series: MHW5500FW, MHW5500DW
MHW5630 Series: MHW5630HW, MHW5630HC
MHW6000 Series: MHW6000XW
MHW6630 Series: MHW6630HW, MHW6630HC
MHW7000 Series: MHW7000XW
MHW7100 Series: MHW7100DW
MHW8200 Series: MHW8200FW
MHW8630 Series: MHW8630HW, MHW8630HC
MHW9000 Series: MHW9000YW, MHW9000XL, MHW9000XR
MHWE Series: MHWE200XW, MHWE201YW, MHWE251YG, MHWE251YW, MHWE301YG, MHWE301YW
MHWZ Series: MHWZ400TQ, MHWZ600TW
Commercial Front-Load: MLG2000AWW, MLG3000AWW, MLG4500 Series

📁

Other Maytag Washer Error Codes

Show All Error Codes

Model-Specific Notes

On modern MHW-series front-load washers, F0E1 is almost always caused by clothing left in the drum during the Clean Washer cycle. On older MHWE and Neptune models, small items trapped in the door boot can also trigger this error.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.