What are the symptoms of error code F0E7 (Front-Load)?

Washer refuses to start calibration or Clean Washer cycle, Cycle stops immediately with F0E7, Washer detects load even when only a few small items are present, Washer prompts user to remove items from the drum

What causes error code F0E7 (Front-Load)?

Clothing or items left inside the drum (most common), Small items trapped in the door boot, Heavy residue buildup causing false load detection, Drum movement restricted by foreign objects, Motor torque misread due to worn shocks (rare)

How do I fix error code F0E7 (Front-Load)?

Remove all items from the drum and restart the cycle., Check the door boot for socks or small trapped items., Rotate the drum by hand to ensure it moves freely., Run a Rinse & Spin cycle to clear residue if detection seems inaccurate., If the error persists, inspect the shocks for excessive play., Verify that no foreign objects are lodged between the drum and tub.

Maytag Washer - F0E7 (Front-Load) Error Code

Load detected when the washer should be empty.

Meaning

Load detected when the washer should be empty.

The Maytag F0E7 error code on front-load washers indicates that the appliance control unit (ACU) detected items inside the drum during a cycle that requires the washer to be empty. Whirlpool-built Maytag front-load washers use motor-torque sensing and drum-movement feedback to determine whether the drum contains clothing. This error typically appears during calibration cycles, spin tests, or Clean Washer cycles when the washer must be empty to perform accurate balancing and internal cleaning.

Symptoms

Washer refuses to start calibration or Clean Washer cycle
Cycle stops immediately with F0E7
Washer detects load even when only a few small items are present
Washer prompts user to remove items from the drum

Causes

Clothing or items left inside the drum (most common)
Small items trapped in the door boot
Heavy residue buildup causing false load detection
Drum movement restricted by foreign objects
Motor torque misread due to worn shocks (rare)

🔧

Step-by-Step Fixes

Remove all items from the drum and restart the cycle.
Check the door boot for socks or small trapped items.
Rotate the drum by hand to ensure it moves freely.
Run a Rinse & Spin cycle to clear residue if detection seems inaccurate.
If the error persists, inspect the shocks for excessive play.
Verify that no foreign objects are lodged between the drum and tub.

⚠️

Safety Notes

Do not run calibration or Clean Washer cycles with items inside the drum.
Avoid overloading the washer, as residue buildup can affect load detection.

📋

Applicable Models

Show Models

MHW3000 Series: MHW3000BW, MHW3100DW
MHW3500 Series: MHW3500FW, MHW3505FW
MHW4200 Series: MHW4200BW
MHW4300 Series: MHW4300DW
MHW5100 Series: MHW5100DW
MHW5500 Series: MHW5500FW, MHW5500DW
MHW5630 Series: MHW5630HW, MHW5630HC
MHW6000 Series: MHW6000XW
MHW6630 Series: MHW6630HW, MHW6630HC
MHW7000 Series: MHW7000XW
MHW7100 Series: MHW7100DW
MHW8200 Series: MHW8200FW
MHW8630 Series: MHW8630HW, MHW8630HC
MHW9000 Series: MHW9000YW, MHW9000XL, MHW9000XR
MHWE Series: MHWE200XW, MHWE201YW, MHWE251YG, MHWE251YW, MHWE301YG, MHWE301YW
MHWZ Series: MHWZ400TQ, MHWZ600TW
Commercial Front-Load: MLG2000AWW, MLG3000AWW, MLG4500 Series

📁

Other Maytag Washer Error Codes

Show All Error Codes

Model-Specific Notes

On modern MHW-series front-load washers, F0E7 is most commonly triggered when users accidentally leave a few small items in the drum during calibration or Clean Washer cycles. On older MHWE models, drum resistance or shock wear can cause false load detection.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.