Maytag Washer - F2E3 (Top-Load) Error Code
UI & ACU mismatch --- the user interface and main control are not communicating with compatible software or hardware.
Meaning
UI & ACU mismatch --- the user interface and main control are not communicating with compatible software or hardware.
The Maytag F2E3 error code on top-load washers indicates that the user interface (UI) and the appliance control unit (ACU) are not matched correctly. Whirlpool-built Maytag top-load washers require the UI and ACU to share compatible firmware, model configuration, and communication protocols. If the UI is replaced with the wrong part, if the ACU is swapped with an incompatible revision, or if firmware becomes corrupted, the control triggers F2E3. This error prevents the washer from running to avoid unsafe or unpredictable operation.
Symptoms
Causes
Step-by-Step Fixes
- Verify that the UI and ACU part numbers match the washer---s model and revision.
- Inspect the UI-to-ACU harness for loose or damaged connectors.
- Check for moisture or corrosion inside the console.
- Perform a hard reset by unplugging the washer for 1---2 minutes.
- Reinstall or reseat the UI and ACU connectors.
- Replace the UI or ACU with the correct part if mismatched.
- If both boards were replaced, ensure they are from the same revision family.
Safety Notes
- Disconnect power before accessing the UI or ACU.
- Avoid touching exposed circuitry to prevent static damage.
- Do not operate the washer with mismatched control components.
Applicable Models
Show Models
- Modern HE Top-Load (No Agitator): MVWB835DW, MVWB835DC, MVWB865GW, MVWB865GC, MVWB766FW, MVWB766FC, MVWB725BW, MVWB725BC, MVWB750YW, MVWB750WB, MVWB880BW, MVWB880WC
- Modern HE Top-Load With Agitator: MVW6230HW, MVW6230RHW, MVW6230HC, MVW7230HW, MVW7230HC, MVW7232HW, MVW7232HC, MVW6200KW, MVW6200KG, MVW6500MBK, MVW6500MW, MVW5035MW, MVW5030MW, MVW5430MW
- Bravos Series (HE Top-Load): MVWB300BW, MVWB300WQ, MVWB300VW, MVWB400BW, MVWB400VQ, MVWB400VW, MVWB450BW, MVWB450WQ, MVWB450VW, MVWB700VQ, MVWB700BW, MVWB700VW, MVWB750YW, MVWB750WB, MVWB850YW, MVWB850WB
- Centennial Series (HE Top-Load): MVWC400XW, MVWC400VW, MVWC500XW, MVWC500VW, MVWC565FW, MVWC565FW1, MVWC565FW2
- Commercial Technology Top-Load: MVWC565FW, MVWC565FW1, MVWC565FW2, MVWC6ESWW, MVWC6ESW1
- Maytag 3000 Series (Top-Load HE): MVWB300WQ, MVWB300BW, MVWB300VW
- Maytag 4000 Series (Top-Load HE): MVWB400VQ, MVWB400BW, MVWB400VW
- Maytag 5000 Series (Top-Load HE): MVWB500WQ, MVWB500BW, MVWB500VW
- Maytag 6000 Series (Top-Load HE): MVWB600WQ, MVWB600BW, MVWB600VW
- Additional Verified F-Code Top-Load Models: MVW18MNBGW, MVW18MNBGW1, MVW20MNBGW, MVW20MNBGW1
Related Pages
- Maytag Washer F2E5 (Top-Load) – UI/ACU software version mismatch --- the user interface and main control are running incompatible firmware.
- Maytag Washer F6E2 (Top-Load) – UI to ACU communication error --- washer cannot communicate with the control panel.
- Maytag Washer F6E3 (Top-Load) – ACU to UI communication error --- control board cannot send data to the user interface.
- Maytag Washer F1E3 (Top-Load) – ACU reset or power loss fault --- washer detected an unexpected control reset.
- Maytag Washer F1E1 (Top-Load) – Main control fault --- the ACU has detected an internal hardware or processing failure.
Other Maytag Washer Error Codes
Show All Error Codes
- Maytag MVW4505MW Washer Cheat Sheet
- Maytag Neptune TL dc Error Code - Unbalanced Condition
- Maytag Neptune TL Hr Error Code --- Heater Relay Error
- Maytag Neptune TL LE Error Code --- Lid Error
- Maytag Neptune TL LO Error Code --- Locked Rotor
- Maytag Neptune TL OP Error Code --- Lid Open
- Maytag Neptune TL SL Error Code --- Suds Lock
- Maytag Neptune TL UC Error Code --- Uncontrolled Spin
- Maytag Washer CE Error Code - Communication Error
- Maytag Washer dL Error Code - Lock Failure
- Maytag Washer dU Error Code - Unlock Failure
- Maytag Washer F0E1 (Front-Load) Error Code
- Maytag Washer F0E2 (Front-Load) Error Code
- Maytag Washer F0E2 (Top-Load) Error Code
- Maytag Washer F0E3 (Front-Load) Error Code
- Maytag Washer F0E3 (Top-Load) Error Code
- Maytag Washer F0E4 (Front-Load) Error Code
- Maytag Washer F0E4 (Top-Load) Error Code
- Maytag Washer F0E5 (Front-Load) Error Code
- Maytag Washer F0E5 (Top-Load) Error Code
- Maytag Washer F0E7 (Front-Load) Error Code
- Maytag Washer F0E7 (Top-Load) Error Code
- Maytag Washer F0E8 (Top-Load) Error Code
- Maytag Washer F0E9 (Top-Load) Error Code
- Maytag Washer F1E1 (Front-Load) Error Code
- Maytag Washer F1E1 (Top-Load) Error Code
- Maytag Washer F1E2 (Front-Load) Error Code
- Maytag Washer F1E2 (Top-Load) Error Code
- Maytag Washer F1E3 (Front-Load) Error Code
- Maytag Washer F1E3 (Top-Load) Error Code
- Maytag Washer F1E4 (Top-Load) Error Code
- Maytag Washer F1E5 (Top-Load) Error Code
- Maytag Washer F2E1 Error Code --- UI Stuck Button
- Maytag Washer F2E2 (Front-Load) Error Code
- Maytag Washer F2E5 (Top-Load) Error Code
- Maytag Washer F3E1 Error Code --- Water Level System Error
- Maytag Washer F3E2 (Front-Load) Error Code
- Maytag Washer F3E2 (Top-Load) Error Code
- Maytag Washer F3E3 (Front-Load) Error Code
- Maytag Washer F3E3 (Top-Load) Error Code
- Maytag Washer F3E5 (Front-Load) Error Code
- Maytag Washer F3E6 (Front-Load) Error Code
- Maytag Washer F4E1 (Front-Load) Error Code
- Maytag Washer F4E4 (Front-Load) Error Code
- Maytag Washer F5E1 Error Code --- Door or Lid Not Locked
- Maytag Washer F5E2 Error Code --- Door or Lid Not Opened Between Cycles
- Maytag Washer F5E3 Error Code --- Door or Lid Unlock Failure
- Maytag Washer F5E4 (Front-Load) Error Code
- Maytag Washer F5E4 (Top-Load) Error Code
- Maytag Washer F5E5 (Top-Load) Error Code
- Maytag Washer F6E1 Error Code --- Communication Error
- Maytag Washer F6E2 (Front-Load) Error Code
- Maytag Washer F6E2 (Top-Load) Error Code
- Maytag Washer F6E3 (Front-Load) Error Code
- Maytag Washer F6E3 (Top-Load) Error Code
- Maytag Washer F6E4 (Top-Load) Error Code
- Maytag Washer F7E1 Error Code --- Speed Sensor or Motor Speed Error
- Maytag Washer F7E2 (Front-Load) Error Code
- Maytag Washer F7E2 (Top-Load) Error Code
- Maytag Washer F7E3 (Front-Load) Error Code
- Maytag Washer F7E3 (Top-Load) Error Code
- Maytag Washer F7E4 (Top-Load) Error Code
- Maytag Washer F7E5 (Top-Load) Error Code
- Maytag Washer F7E6 (Front-Load) Error Code
- Maytag Washer F7E6 (Top-Load) Error Code
- Maytag Washer F7E7 (Front-Load) Error Code
- Maytag Washer F7E7 (Top-Load) Error Code
- Maytag Washer F7E8 (Front-Load) Error Code
- Maytag Washer F7E8 (Top-Load) Error Code
- Maytag Washer F7E9 (Front-Load) Error Code
- Maytag Washer F7EA (Front-Load) Error Code
- Maytag Washer F7EC (Front-Load) Error Code
- Maytag Washer F8E1 Error Code --- No Fill or Long Fill
- Maytag Washer F8E2 (Front-Load) Error Code
- Maytag Washer F8E2 (Top-Load) Error Code
- Maytag Washer F8E3 (Front-Load) Error Code
- Maytag Washer F8E3 (Top-Load) Error Code
- Maytag Washer F8E5 (Top-Load) Error Code
- Maytag Washer F9E1 Error Code --- Long Drain
- Maytag Washer F9E2 (Top-Load) Error Code
- Maytag Washer F9E3 (Top-Load) Error Code
- Maytag Washer Int Error Code --- Cycle Interrupted
- Maytag Washer LE Error Code --- Motor Error
- Maytag Washer LF or LO FL Error Code --- Long Fill / Low Water Flow
- Maytag Washer LOC or LC Error Code --- Control Lock Activated
- Maytag Washer nd Error Code --- No Drain
- Maytag Washer nF Error Code --- No Fill Detected
- Maytag Washer OL Error Code --- Overload Detected
- Maytag Washer PAU Error Code --- Cycle Paused
- Maytag Washer PF Error Code --- Power Failure
- Maytag Washer rL Error Code --- Items Detected in Clean Washer Cycle
- Maytag Washer Sd or SUD Error Code --- Excess Suds Detected
- Maytag Washer tE Error Code --- Temperature Sensor Error
- Maytag Washer UL Error Code --- Unbalanced Load
Model-Specific Notes
On modern MVW and MVWB HE top-load washers, F2E3 is most commonly caused by installing the wrong UI or ACU part number. On older Bravos and Centennial models, moisture intrusion and connector oxidation frequently cause UI-ACU communication mismatches.
Disclaimer
The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.