Maytag Washer - F5E2 Error Code

The washer detected that the door or lid was not opened between cycles.

Meaning

The washer detected that the door or lid was not opened between cycles.

The Maytag F5E2 error code indicates that the washer expects the door (front-load models) or lid (top-load VMW models) to be opened between completed cycles, but the control did not detect this action. This is a safety and user-interaction requirement built into both platforms. On front-load models, the door lock assembly includes a switch that confirms the door has been opened. On top-load VMW models, the lid lock assembly includes a lid-open sensing switch. If the washer does not detect an open event, it may assume the previous load was not removed or that the lock mechanism is stuck. This prevents the next cycle from starting until the issue is resolved.

Symptoms

  • Washer will not start a new cycle
  • F5E2 appears immediately after selecting a cycle
  • Door or lid appears closed even when opened
  • Front-load models may show 'Door Locked' even when unlocked
  • Top-load VMW models may not register lid movement
  • Washer may require multiple attempts to start a cycle

Causes

  • Door or lid was not opened after the previous cycle
  • Failed door-open switch (front-load)
  • Failed lid-open sensing switch (top-load VMW)
  • Broken or misaligned strike
  • Wiring harness corrosion or loose connections
  • Door or lid lock mechanism stuck in the locked position
  • Control board not detecting the open event
πŸ”§

Step-by-Step Fixes

  • Open and close the door or lid firmly to register the open event.
  • Inspect the strike for cracks, bending, or misalignment.
  • Check for debris blocking the latch or strike area.
  • On front-load models, test the door-open sensing switch inside the lock assembly.
  • On VMW models, test the lid-open switch inside the lid lock mechanism.
  • Inspect wiring harness connections for corrosion or loose seating.
  • Replace the door lock or lid lock assembly if the open switch fails testing.
  • Replace the main control only if the lock assembly tests good.
⚠️

Safety Notes

  • Disconnect power before accessing the lock assembly.
  • Do not force the door or lid open if resistance is felt.
  • Avoid slamming the door or lid, which can damage the strike or sensing switch.
πŸ“‹

Applicable Models

Show Models
  • Front-Load Maytag MHW Series: MHW3000BW, MHW3100DW, MHW3500FW, MHW3505FW, MHW4200BW, MHW4300DW, MHW5100DW, MHW5500FW, MHW5500DW, MHW5630HW, MHW5630HC, MHW6000XW, MHW6630HW, MHW6630HC, MHW7000XW, MHW7100DW, MHW8200FW, MHW8630HW, MHW8630HC, MHW9000YW, MHW9000XL, MHW9000XR
  • Front-Load Maytag MHWE Series: MHWE200XW, MHWE201YW, MHWE251YG, MHWE251YW, MHWE301YG, MHWE301YW
  • Front-Load Maytag MHWZ Series: MHWZ400TQ, MHWZ600TW
  • Top-Load Maytag MVWC Series (VMW): MVWC200BW, MVWC300BW, MVWC350BW, MVWC360FW, MVWC415EW, MVWC416FW, MVWC425BW, MVWC465HW, MVWC565FW, MVWC575FW, MVWC6ESWW, MVWC700VW, MVWC700VQ, MVWC7000WQ, MVWC7000XW, MVWC7000YW, MVWC750YW, MVWC755DW, MVWC765FW, MVWC766FW, MVWC835DW, MVWC836DW, MVWC840GW, MVWC845GW, MVWC855DW, MVWC865GW
  • Top-Load Maytag MVW Series (VMW): MVW4505MW, MVW4505MW2, MVW5430MW, MVW5430MW2, MVW5435MW, MVW5435MW2, MVW5435PBK, MVW6500MBK, MVW6500MBK0, MVW7230HW, MVW7230HC, MVW7232HW
  • Top-Load Maytag MVWB Series (VMW high-capacity): MVWB835DW, MVWB835DW1, MVWB855DC, MVWB855DW, MVWB766FW, MVWB765FW, MVWB765FW1
πŸ“

Related Pages

πŸ“

Other Maytag Washer Error Codes

Show All Error Codes

Model-Specific Notes

Front-load Maytag washers typically trigger F5E2 when the door-open sensing switch inside the lock assembly fails or when the door is not opened fully after a cycle. Top-load VMW models more commonly experience F5E2 due to a worn lid-open switch, a broken strike, or wiring fatigue near the hinge area. This error often appears after a user removes laundry without fully opening the lid or door.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.