Maytag Washer - F6E2 (Top-Load) Error Code
UI to ACU communication error --- washer cannot communicate with the control panel.
Meaning
UI to ACU communication error --- washer cannot communicate with the control panel.
The Maytag F6E2 error code on top-load washers indicates that the user interface (UI) and the appliance control unit (ACU) have lost digital communication. Whirlpool-built Maytag top-load washers use a serial communication link between the UI and ACU. If this link becomes unstable, corrupted, or fails entirely, the control triggers F6E2. This prevents the washer from starting or continuing a cycle because the ACU cannot reliably receive button inputs or send status information back to the UI.
Symptoms
Causes
Step-by-Step Fixes
- Unplug the washer for 1---2 minutes to reset communication.
- Remove the console and inspect the UI ribbon cable for corrosion or damage.
- Disconnect and reconnect the UI harness to reseat the connection.
- Check for moisture inside the console and dry thoroughly if present.
- Inspect the ACU connector for bent pins or corrosion.
- Replace the UI panel if communication remains unstable.
- Replace the ACU only after confirming the UI and wiring are functioning correctly.
Safety Notes
- Disconnect power before removing the console or accessing internal wiring.
- Avoid spraying cleaners directly onto the control panel; apply to a cloth instead.
- Do not operate the washer if the UI is intermittently losing communication.
Applicable Models
Show Models
- Modern HE Top-Load (No Agitator): MVWB835DW, MVWB835DC, MVWB865GW, MVWB865GC, MVWB766FW, MVWB766FC, MVWB725BW, MVWB725BC, MVWB750YW, MVWB750WB, MVWB880BW, MVWB880WC
- Modern HE Top-Load With Agitator: MVW6230HW, MVW6230RHW, MVW6230HC, MVW7230HW, MVW7230HC, MVW7232HW, MVW7232HC, MVW6200KW, MVW6200KG, MVW6500MBK, MVW6500MW, MVW5035MW, MVW5030MW, MVW5430MW
- Bravos Series (HE Top-Load): MVWB300BW, MVWB300WQ, MVWB300VW, MVWB400BW, MVWB400VQ, MVWB400VW, MVWB450BW, MVWB450WQ, MVWB450VW, MVWB700VQ, MVWB700BW, MVWB700VW, MVWB750YW, MVWB750WB, MVWB850YW, MVWB850WB
- Centennial Series (HE Top-Load): MVWC400XW, MVWC400VW, MVWC500XW, MVWC500VW, MVWC565FW, MVWC565FW1, MVWC565FW2
- Commercial Technology Top-Load: MVWC565FW, MVWC565FW1, MVWC565FW2, MVWC6ESWW, MVWC6ESW1
- Maytag 3000 Series (Top-Load HE): MVWB300WQ, MVWB300BW, MVWB300VW
- Maytag 4000 Series (Top-Load HE): MVWB400VQ, MVWB400BW, MVWB400VW
- Maytag 5000 Series (Top-Load HE): MVWB500WQ, MVWB500BW, MVWB500VW
- Maytag 6000 Series (Top-Load HE): MVWB600WQ, MVWB600BW, MVWB600VW
- Additional Verified F-Code Top-Load Models: MVW18MNBGW, MVW18MNBGW1, MVW20MNBGW, MVW20MNBGW1
Related Pages
- Maytag Washer F6E3 (Top-Load) – ACU to UI communication error --- control board cannot send data to the user interface.
- Maytag Washer F2E1 – A button on the washer---s user interface is stuck or being detected as continuously pressed.
- Maytag Washer F0E2 (Top-Load) – Oversuds condition --- too many suds detected during wash or rinse.
- Maytag Washer F3E1 – The washer is detecting an issue with the water level sensing system.
- Maytag Washer F8E1 – The washer is taking too long to fill or is not detecting water entering the machine.
Other Maytag Washer Error Codes
Show All Error Codes
- Maytag MVW4505MW Washer Cheat Sheet
- Maytag Neptune TL dc Error Code - Unbalanced Condition
- Maytag Neptune TL Hr Error Code --- Heater Relay Error
- Maytag Neptune TL LE Error Code --- Lid Error
- Maytag Neptune TL LO Error Code --- Locked Rotor
- Maytag Neptune TL OP Error Code --- Lid Open
- Maytag Neptune TL SL Error Code --- Suds Lock
- Maytag Neptune TL UC Error Code --- Uncontrolled Spin
- Maytag Washer CE Error Code - Communication Error
- Maytag Washer dL Error Code - Lock Failure
- Maytag Washer dU Error Code - Unlock Failure
- Maytag Washer F0E1 (Front-Load) Error Code
- Maytag Washer F0E2 (Front-Load) Error Code
- Maytag Washer F0E2 (Top-Load) Error Code
- Maytag Washer F0E3 (Front-Load) Error Code
- Maytag Washer F0E3 (Top-Load) Error Code
- Maytag Washer F0E4 (Front-Load) Error Code
- Maytag Washer F0E4 (Top-Load) Error Code
- Maytag Washer F0E5 (Front-Load) Error Code
- Maytag Washer F0E5 (Top-Load) Error Code
- Maytag Washer F0E7 (Front-Load) Error Code
- Maytag Washer F0E7 (Top-Load) Error Code
- Maytag Washer F0E8 (Top-Load) Error Code
- Maytag Washer F0E9 (Top-Load) Error Code
- Maytag Washer F1E1 (Front-Load) Error Code
- Maytag Washer F1E1 (Top-Load) Error Code
- Maytag Washer F1E2 (Front-Load) Error Code
- Maytag Washer F1E2 (Top-Load) Error Code
- Maytag Washer F1E3 (Front-Load) Error Code
- Maytag Washer F1E3 (Top-Load) Error Code
- Maytag Washer F1E4 (Top-Load) Error Code
- Maytag Washer F1E5 (Top-Load) Error Code
- Maytag Washer F2E1 Error Code --- UI Stuck Button
- Maytag Washer F2E2 (Front-Load) Error Code
- Maytag Washer F2E3 (Top-Load) Error Code
- Maytag Washer F2E5 (Top-Load) Error Code
- Maytag Washer F3E1 Error Code --- Water Level System Error
- Maytag Washer F3E2 (Front-Load) Error Code
- Maytag Washer F3E2 (Top-Load) Error Code
- Maytag Washer F3E3 (Front-Load) Error Code
- Maytag Washer F3E3 (Top-Load) Error Code
- Maytag Washer F3E5 (Front-Load) Error Code
- Maytag Washer F3E6 (Front-Load) Error Code
- Maytag Washer F4E1 (Front-Load) Error Code
- Maytag Washer F4E4 (Front-Load) Error Code
- Maytag Washer F5E1 Error Code --- Door or Lid Not Locked
- Maytag Washer F5E2 Error Code --- Door or Lid Not Opened Between Cycles
- Maytag Washer F5E3 Error Code --- Door or Lid Unlock Failure
- Maytag Washer F5E4 (Front-Load) Error Code
- Maytag Washer F5E4 (Top-Load) Error Code
- Maytag Washer F5E5 (Top-Load) Error Code
- Maytag Washer F6E1 Error Code --- Communication Error
- Maytag Washer F6E2 (Front-Load) Error Code
- Maytag Washer F6E3 (Front-Load) Error Code
- Maytag Washer F6E3 (Top-Load) Error Code
- Maytag Washer F6E4 (Top-Load) Error Code
- Maytag Washer F7E1 Error Code --- Speed Sensor or Motor Speed Error
- Maytag Washer F7E2 (Front-Load) Error Code
- Maytag Washer F7E2 (Top-Load) Error Code
- Maytag Washer F7E3 (Front-Load) Error Code
- Maytag Washer F7E3 (Top-Load) Error Code
- Maytag Washer F7E4 (Top-Load) Error Code
- Maytag Washer F7E5 (Top-Load) Error Code
- Maytag Washer F7E6 (Front-Load) Error Code
- Maytag Washer F7E6 (Top-Load) Error Code
- Maytag Washer F7E7 (Front-Load) Error Code
- Maytag Washer F7E7 (Top-Load) Error Code
- Maytag Washer F7E8 (Front-Load) Error Code
- Maytag Washer F7E8 (Top-Load) Error Code
- Maytag Washer F7E9 (Front-Load) Error Code
- Maytag Washer F7EA (Front-Load) Error Code
- Maytag Washer F7EC (Front-Load) Error Code
- Maytag Washer F8E1 Error Code --- No Fill or Long Fill
- Maytag Washer F8E2 (Front-Load) Error Code
- Maytag Washer F8E2 (Top-Load) Error Code
- Maytag Washer F8E3 (Front-Load) Error Code
- Maytag Washer F8E3 (Top-Load) Error Code
- Maytag Washer F8E5 (Top-Load) Error Code
- Maytag Washer F9E1 Error Code --- Long Drain
- Maytag Washer F9E2 (Top-Load) Error Code
- Maytag Washer F9E3 (Top-Load) Error Code
- Maytag Washer Int Error Code --- Cycle Interrupted
- Maytag Washer LE Error Code --- Motor Error
- Maytag Washer LF or LO FL Error Code --- Long Fill / Low Water Flow
- Maytag Washer LOC or LC Error Code --- Control Lock Activated
- Maytag Washer nd Error Code --- No Drain
- Maytag Washer nF Error Code --- No Fill Detected
- Maytag Washer OL Error Code --- Overload Detected
- Maytag Washer PAU Error Code --- Cycle Paused
- Maytag Washer PF Error Code --- Power Failure
- Maytag Washer rL Error Code --- Items Detected in Clean Washer Cycle
- Maytag Washer Sd or SUD Error Code --- Excess Suds Detected
- Maytag Washer tE Error Code --- Temperature Sensor Error
- Maytag Washer UL Error Code --- Unbalanced Load
Model-Specific Notes
On modern MVW and MVWB HE top-load washers, F6E2 is most commonly caused by moisture intrusion into the UI panel or a loose ribbon cable. On older Bravos and Centennial models, UI ribbon-cable corrosion and connector fatigue frequently cause intermittent communication failures.
Disclaimer
The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.