Maytag Washer - F6E3 (Top-Load) Error Code
ACU to UI communication error --- control board cannot send data to the user interface.
Meaning
ACU to UI communication error --- control board cannot send data to the user interface.
The Maytag F6E3 error code on top-load washers indicates that the appliance control unit (ACU) is unable to communicate with the user interface (UI). Whirlpool-built Maytag top-load washers use a bidirectional serial communication link between the ACU and UI. If the ACU cannot transmit status data, cycle information, or operational commands back to the UI, the control triggers F6E3. This prevents the washer from running because the UI cannot display accurate information or respond to ACU instructions.
Symptoms
Causes
Step-by-Step Fixes
- Unplug the washer for 1---2 minutes to reset communication.
- Remove the console and inspect the UI ribbon cable for corrosion or damage.
- Disconnect and reconnect the UI harness to reseat the connection.
- Check for moisture inside the console and dry thoroughly if present.
- Inspect the ACU connector for bent pins, corrosion, or contamination.
- Replace the UI panel if it cannot receive ACU data.
- Replace the ACU only after confirming the UI and wiring are functioning correctly.
Safety Notes
- Disconnect power before removing the console or accessing internal wiring.
- Avoid spraying cleaners directly onto the control panel; apply to a cloth instead.
- Do not operate the washer if the UI is intermittently losing communication.
Applicable Models
Show Models
- Modern HE Top-Load (No Agitator): MVWB835DW, MVWB835DC, MVWB865GW, MVWB865GC, MVWB766FW, MVWB766FC, MVWB725BW, MVWB725BC, MVWB750YW, MVWB750WB, MVWB880BW, MVWB880WC
- Modern HE Top-Load With Agitator: MVW6230HW, MVW6230RHW, MVW6230HC, MVW7230HW, MVW7230HC, MVW7232HW, MVW7232HC, MVW6200KW, MVW6200KG, MVW6500MBK, MVW6500MW, MVW5035MW, MVW5030MW, MVW5430MW
- Bravos Series (HE Top-Load): MVWB300BW, MVWB300WQ, MVWB300VW, MVWB400BW, MVWB400VQ, MVWB400VW, MVWB450BW, MVWB450WQ, MVWB450VW, MVWB700VQ, MVWB700BW, MVWB700VW, MVWB750YW, MVWB750WB, MVWB850YW, MVWB850WB
- Centennial Series (HE Top-Load): MVWC400XW, MVWC400VW, MVWC500XW, MVWC500VW, MVWC565FW, MVWC565FW1, MVWC565FW2
- Commercial Technology Top-Load: MVWC565FW, MVWC565FW1, MVWC565FW2, MVWC6ESWW, MVWC6ESW1
- Maytag 3000 Series (Top-Load HE): MVWB300WQ, MVWB300BW, MVWB300VW
- Maytag 4000 Series (Top-Load HE): MVWB400VQ, MVWB400BW, MVWB400VW
- Maytag 5000 Series (Top-Load HE): MVWB500WQ, MVWB500BW, MVWB500VW
- Maytag 6000 Series (Top-Load HE): MVWB600WQ, MVWB600BW, MVWB600VW
- Additional Verified F-Code Top-Load Models: MVW18MNBGW, MVW18MNBGW1, MVW20MNBGW, MVW20MNBGW1
Related Pages
- Maytag Washer F6E2 (Top-Load) – UI to ACU communication error --- washer cannot communicate with the control panel.
- Maytag Washer F2E1 – A button on the washer---s user interface is stuck or being detected as continuously pressed.
- Maytag Washer F0E2 (Top-Load) – Oversuds condition --- too many suds detected during wash or rinse.
- Maytag Washer F3E1 – The washer is detecting an issue with the water level sensing system.
- Maytag Washer F8E1 – The washer is taking too long to fill or is not detecting water entering the machine.
Other Maytag Washer Error Codes
Show All Error Codes
- Maytag MVW4505MW Washer Cheat Sheet
- Maytag Neptune TL dc Error Code - Unbalanced Condition
- Maytag Neptune TL Hr Error Code --- Heater Relay Error
- Maytag Neptune TL LE Error Code --- Lid Error
- Maytag Neptune TL LO Error Code --- Locked Rotor
- Maytag Neptune TL OP Error Code --- Lid Open
- Maytag Neptune TL SL Error Code --- Suds Lock
- Maytag Neptune TL UC Error Code --- Uncontrolled Spin
- Maytag Washer CE Error Code - Communication Error
- Maytag Washer dL Error Code - Lock Failure
- Maytag Washer dU Error Code - Unlock Failure
- Maytag Washer F0E1 (Front-Load) Error Code
- Maytag Washer F0E2 (Front-Load) Error Code
- Maytag Washer F0E2 (Top-Load) Error Code
- Maytag Washer F0E3 (Front-Load) Error Code
- Maytag Washer F0E3 (Top-Load) Error Code
- Maytag Washer F0E4 (Front-Load) Error Code
- Maytag Washer F0E4 (Top-Load) Error Code
- Maytag Washer F0E5 (Front-Load) Error Code
- Maytag Washer F0E5 (Top-Load) Error Code
- Maytag Washer F0E7 (Front-Load) Error Code
- Maytag Washer F0E7 (Top-Load) Error Code
- Maytag Washer F0E8 (Top-Load) Error Code
- Maytag Washer F0E9 (Top-Load) Error Code
- Maytag Washer F1E1 (Front-Load) Error Code
- Maytag Washer F1E1 (Top-Load) Error Code
- Maytag Washer F1E2 (Front-Load) Error Code
- Maytag Washer F1E2 (Top-Load) Error Code
- Maytag Washer F1E3 (Front-Load) Error Code
- Maytag Washer F1E3 (Top-Load) Error Code
- Maytag Washer F1E4 (Top-Load) Error Code
- Maytag Washer F1E5 (Top-Load) Error Code
- Maytag Washer F2E1 Error Code --- UI Stuck Button
- Maytag Washer F2E2 (Front-Load) Error Code
- Maytag Washer F2E3 (Top-Load) Error Code
- Maytag Washer F2E5 (Top-Load) Error Code
- Maytag Washer F3E1 Error Code --- Water Level System Error
- Maytag Washer F3E2 (Front-Load) Error Code
- Maytag Washer F3E2 (Top-Load) Error Code
- Maytag Washer F3E3 (Front-Load) Error Code
- Maytag Washer F3E3 (Top-Load) Error Code
- Maytag Washer F3E5 (Front-Load) Error Code
- Maytag Washer F3E6 (Front-Load) Error Code
- Maytag Washer F4E1 (Front-Load) Error Code
- Maytag Washer F4E4 (Front-Load) Error Code
- Maytag Washer F5E1 Error Code --- Door or Lid Not Locked
- Maytag Washer F5E2 Error Code --- Door or Lid Not Opened Between Cycles
- Maytag Washer F5E3 Error Code --- Door or Lid Unlock Failure
- Maytag Washer F5E4 (Front-Load) Error Code
- Maytag Washer F5E4 (Top-Load) Error Code
- Maytag Washer F5E5 (Top-Load) Error Code
- Maytag Washer F6E1 Error Code --- Communication Error
- Maytag Washer F6E2 (Front-Load) Error Code
- Maytag Washer F6E2 (Top-Load) Error Code
- Maytag Washer F6E3 (Front-Load) Error Code
- Maytag Washer F6E4 (Top-Load) Error Code
- Maytag Washer F7E1 Error Code --- Speed Sensor or Motor Speed Error
- Maytag Washer F7E2 (Front-Load) Error Code
- Maytag Washer F7E2 (Top-Load) Error Code
- Maytag Washer F7E3 (Front-Load) Error Code
- Maytag Washer F7E3 (Top-Load) Error Code
- Maytag Washer F7E4 (Top-Load) Error Code
- Maytag Washer F7E5 (Top-Load) Error Code
- Maytag Washer F7E6 (Front-Load) Error Code
- Maytag Washer F7E6 (Top-Load) Error Code
- Maytag Washer F7E7 (Front-Load) Error Code
- Maytag Washer F7E7 (Top-Load) Error Code
- Maytag Washer F7E8 (Front-Load) Error Code
- Maytag Washer F7E8 (Top-Load) Error Code
- Maytag Washer F7E9 (Front-Load) Error Code
- Maytag Washer F7EA (Front-Load) Error Code
- Maytag Washer F7EC (Front-Load) Error Code
- Maytag Washer F8E1 Error Code --- No Fill or Long Fill
- Maytag Washer F8E2 (Front-Load) Error Code
- Maytag Washer F8E2 (Top-Load) Error Code
- Maytag Washer F8E3 (Front-Load) Error Code
- Maytag Washer F8E3 (Top-Load) Error Code
- Maytag Washer F8E5 (Top-Load) Error Code
- Maytag Washer F9E1 Error Code --- Long Drain
- Maytag Washer F9E2 (Top-Load) Error Code
- Maytag Washer F9E3 (Top-Load) Error Code
- Maytag Washer Int Error Code --- Cycle Interrupted
- Maytag Washer LE Error Code --- Motor Error
- Maytag Washer LF or LO FL Error Code --- Long Fill / Low Water Flow
- Maytag Washer LOC or LC Error Code --- Control Lock Activated
- Maytag Washer nd Error Code --- No Drain
- Maytag Washer nF Error Code --- No Fill Detected
- Maytag Washer OL Error Code --- Overload Detected
- Maytag Washer PAU Error Code --- Cycle Paused
- Maytag Washer PF Error Code --- Power Failure
- Maytag Washer rL Error Code --- Items Detected in Clean Washer Cycle
- Maytag Washer Sd or SUD Error Code --- Excess Suds Detected
- Maytag Washer tE Error Code --- Temperature Sensor Error
- Maytag Washer UL Error Code --- Unbalanced Load
Model-Specific Notes
On modern MVW and MVWB HE top-load washers, F6E3 is most commonly caused by moisture intrusion or a failing UI panel that cannot receive ACU data. On older Bravos and Centennial models, ribbon-cable corrosion and connector fatigue frequently cause intermittent ACU-to-UI communication failures.
Disclaimer
The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.