What are the symptoms of error code F9E2 (Top-Load)?

Washer stops mid-cycle and displays F9E2, Washer hums but does not drain, Washer drains weakly or intermittently, Pump makes grinding, buzzing, or rattling noises, Washer will not enter spin mode, Standing water left in the tub after the cycle

What causes error code F9E2 (Top-Load)?

Drain pump motor failing or seized, Pump impeller broken, stripped, or jammed, Loose or damaged wiring harness to the pump, Foreign objects inside the pump housing, Pump motor overheating due to internal failure, ACU pump-drive circuit failure after mechanical causes are eliminated

How do I fix error code F9E2 (Top-Load)?

Unplug the washer and inspect the drain pump for obstructions., Check the pump impeller for free movement and damage., Inspect the wiring harness for loose connections or damaged wires., Test the pump motor for correct resistance and operation., Replace the drain pump if the motor is weak, noisy, or seized., Inspect the pressure hose and air trap for residue buildup., Replace the ACU only after confirming the pump and wiring are functioning correctly.

Maytag Washer - F9E2 (Top-Load) Error Code

Pump drive error --- washer detects a drain pump electrical or mechanical failure.

Meaning

Pump drive error --- washer detects a drain pump electrical or mechanical failure.

The Maytag F9E2 error code on top-load washers indicates that the drain pump is not operating correctly. Whirlpool-built Maytag top-load washers monitor pump current, motor rotation, and water-level changes during draining. If the pump motor draws abnormal current, fails to spin, stalls, or does not respond to ACU commands, the control triggers F9E2. This code points to a pump *drive* failure rather than a simple clog, meaning the pump motor or its electrical circuit is malfunctioning.

Symptoms

Washer stops mid-cycle and displays F9E2
Washer hums but does not drain
Washer drains weakly or intermittently
Pump makes grinding, buzzing, or rattling noises
Washer will not enter spin mode
Standing water left in the tub after the cycle

Causes

Drain pump motor failing or seized
Pump impeller broken, stripped, or jammed
Loose or damaged wiring harness to the pump
Foreign objects inside the pump housing
Pump motor overheating due to internal failure
ACU pump-drive circuit failure after mechanical causes are eliminated

🔧

Step-by-Step Fixes

Unplug the washer and inspect the drain pump for obstructions.
Check the pump impeller for free movement and damage.
Inspect the wiring harness for loose connections or damaged wires.
Test the pump motor for correct resistance and operation.
Replace the drain pump if the motor is weak, noisy, or seized.
Inspect the pressure hose and air trap for residue buildup.
Replace the ACU only after confirming the pump and wiring are functioning correctly.

⚠️

Safety Notes

Disconnect power before accessing the drain pump or internal components.
Be prepared for water spillage when removing the pump or hoses.
Do not run the washer with a failing pump, as it may overheat or damage the ACU.

📋

Applicable Models

Show Models

Modern HE Top-Load (No Agitator): MVWB835DW, MVWB835DC, MVWB865GW, MVWB865GC, MVWB766FW, MVWB766FC, MVWB725BW, MVWB725BC, MVWB750YW, MVWB750WB, MVWB880BW, MVWB880WC
Modern HE Top-Load With Agitator: MVW6230HW, MVW6230RHW, MVW6230HC, MVW7230HW, MVW7230HC, MVW7232HW, MVW7232HC, MVW6200KW, MVW6200KG, MVW6500MBK, MVW6500MW, MVW5035MW, MVW5030MW, MVW5430MW
Bravos Series (HE Top-Load): MVWB300BW, MVWB300WQ, MVWB300VW, MVWB400BW, MVWB400VQ, MVWB400VW, MVWB450BW, MVWB450WQ, MVWB450VW, MVWB700VQ, MVWB700BW, MVWB700VW, MVWB750YW, MVWB750WB, MVWB850YW, MVWB850WB
Centennial Series (HE Top-Load): MVWC400XW, MVWC400VW, MVWC500XW, MVWC500VW, MVWC565FW, MVWC565FW1, MVWC565FW2
Commercial Technology Top-Load: MVWC565FW, MVWC565FW1, MVWC565FW2, MVWC6ESWW, MVWC6ESW1
Maytag 3000 Series (Top-Load HE): MVWB300WQ, MVWB300BW, MVWB300VW
Maytag 4000 Series (Top-Load HE): MVWB400VQ, MVWB400BW, MVWB400VW
Maytag 5000 Series (Top-Load HE): MVWB500WQ, MVWB500BW, MVWB500VW
Maytag 6000 Series (Top-Load HE): MVWB600WQ, MVWB600BW, MVWB600VW
Additional Verified F-Code Top-Load Models: MVW18MNBGW, MVW18MNBGW1, MVW20MNBGW, MVW20MNBGW1

📁

Other Maytag Washer Error Codes

Show All Error Codes

Model-Specific Notes

On modern MVW and MVWB HE top-load washers, F9E2 is most commonly caused by a failing drain pump motor or a jammed impeller. On older Bravos and Centennial models, pump-motor overheating and wiring-harness fatigue frequently cause intermittent pump-drive failures.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.