What are the symptoms of error code LE?

Washer will not agitate or spin, Washer hums but the drum or basket does not move, Washer stops mid-cycle and displays LE, Washer may attempt to start repeatedly, Burning smell or overheating motor (severe cases)

What causes error code LE?

Failed motor windings, Failed motor control board (front-load models), Faulty shift actuator (top-load models), Loose or damaged wiring harness connections, Overloaded washer causing motor stall, Failed capacitor (older top-load models), Clutch or drive system failure (Neptune TL), Control board unable to sense motor rotation

How do I fix error code LE?

Unplug the washer for 1 minute to reset the control., Inspect wiring harness connections at the motor and control board., Test motor windings for proper resistance., On front-load models, test the motor control board (MCU)., On Bravos/VMW models, test the shift actuator and capacitor., Inspect the drive belt (front-load) for wear or breakage., On Neptune TL models, inspect the clutch and drive system., Replace the motor or control board if testing confirms failure.

Maytag Washer - LE Error Code

The washer detected a motor or motor-drive problem.

Meaning

The washer detected a motor or motor-drive problem.

The Maytag LE error code indicates that the washer detected a motor fault or a problem with the motor drive system. This code appears across multiple Maytag platforms, including front-load MAH models, Bravos/Bravos XL/Centennial/VMW top-load models, and Neptune TL washers. While the motor systems differ---front-load models use a motor control board (MCU), top-load models use a direct-drive motor with a shift actuator, and Neptune TL uses a clutch-driven motor---the meaning is identical: the washer cannot properly drive or sense motor movement.

Symptoms

Washer will not agitate or spin
Washer hums but the drum or basket does not move
Washer stops mid-cycle and displays LE
Washer may attempt to start repeatedly
Burning smell or overheating motor (severe cases)

Causes

Failed motor windings
Failed motor control board (front-load models)
Faulty shift actuator (top-load models)
Loose or damaged wiring harness connections
Overloaded washer causing motor stall
Failed capacitor (older top-load models)
Clutch or drive system failure (Neptune TL)
Control board unable to sense motor rotation

🔧

Step-by-Step Fixes

Unplug the washer for 1 minute to reset the control.
Inspect wiring harness connections at the motor and control board.
Test motor windings for proper resistance.
On front-load models, test the motor control board (MCU).
On Bravos/VMW models, test the shift actuator and capacitor.
Inspect the drive belt (front-load) for wear or breakage.
On Neptune TL models, inspect the clutch and drive system.
Replace the motor or control board if testing confirms failure.

⚠️

Safety Notes

Disconnect power before accessing the motor or control board.
Do not run the washer if burning smells or smoke are present.
Avoid touching electrical components with wet hands.

📋

Applicable Models

Show Models

Front-Load Maytag MAH Series: MAH3000AWW, MAH4000AWW, MAH5500AWW, MAH6500AWW, MAH7500AWW, MAH8700AWW, MAH9700AWW
Top-Load Maytag Bravos Series: MVWB300WQ, MVWB400VQ, MVWB450WQ, MVWB700VQ, MVWB750WQ, MVWB850YW, MVWB880BW, MVWB950YG
Top-Load Maytag Bravos XL Series: MVWB725BW, MVWB835DW, MVWB855DC, MVWB855DW, MVWB950YW
Top-Load Maytag Centennial Series: MVWC300BW, MVWC350BW, MVWC360FW, MVWC415EW, MVWC425BW, MVWC565FW, MVWC575FW
Top-Load Maytag Early VMW Series: MVWC6ESWW, MVWC700VW, MVWC700VQ, MVWC7000WQ, MVWC7000XW, MVWC7000YW, MVWC750YW
Top-Load Maytag Neptune TL Series: FAV6800AWW, FAV9800AWW

📁

Other Maytag Washer Error Codes

Show All Error Codes

Model-Specific Notes

Front-load models typically trigger LE due to failed MCUs or wiring issues. Bravos, Centennial, and VMW top-load models often trigger LE due to shift actuator or motor failures. Neptune TL models may trigger LE when the clutch or drive system prevents proper motor rotation.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.