Maytag Washer - LOC / LC Error Code

The control lock is turned on.

Meaning

The control lock is turned on.

The Maytag LOC or LC error code indicates that the washer---s control lock feature is activated. When the control lock is on, all buttons except the power button are disabled to prevent accidental changes during operation. This code appears across multiple Maytag platforms, including front-load MAH models, Bravos/Bravos XL/Centennial/VMW top-load models, and Neptune TL washers. The meaning is identical across all platforms: the user interface is locked and must be unlocked before the washer will respond to button presses.

Symptoms

  • Washer buttons do not respond
  • LOC or LC appears on the display
  • Washer will not start a cycle
  • Washer beeps when buttons are pressed
  • Cycle cannot be changed or paused

Causes

  • Control lock was activated intentionally
  • Control lock was activated accidentally
  • Child lock engaged
  • Stuck or unresponsive control panel buttons
  • Faulty user interface board (rare)
  • Moisture on the control panel causing false input
πŸ”§

Step-by-Step Fixes

  • Press and hold the Control Lock button for 3---5 seconds to unlock.
  • On some models, press and hold the End of Cycle Signal button.
  • On Bravos/VMW models, press and hold the 'Hold to Start' button for 3 seconds.
  • Wipe moisture from the control panel and try again.
  • Power cycle the washer for 1 minute if the lock will not disengage.
  • If LOC returns immediately, inspect the UI panel for stuck buttons.
⚠️

Safety Notes

  • Disconnect power before removing or servicing the control panel.
  • Avoid spraying cleaners directly onto the control panel.
πŸ“‹

Applicable Models

Show Models
  • Front-Load Maytag MAH Series: MAH3000AWW, MAH4000AWW, MAH5500AWW, MAH6500AWW, MAH7500AWW, MAH8700AWW, MAH9700AWW
  • Top-Load Maytag Bravos Series: MVWB300WQ, MVWB400VQ, MVWB450WQ, MVWB700VQ, MVWB750WQ, MVWB850YW, MVWB880BW, MVWB950YG
  • Top-Load Maytag Bravos XL Series: MVWB725BW, MVWB835DW, MVWB855DC, MVWB855DW, MVWB950YW
  • Top-Load Maytag Centennial Series: MVWC300BW, MVWC350BW, MVWC360FW, MVWC415EW, MVWC425BW, MVWC565FW, MVWC575FW
  • Top-Load Maytag Early VMW Series: MVWC6ESWW, MVWC700VW, MVWC700VQ, MVWC7000WQ, MVWC7000XW, MVWC7000YW, MVWC750YW
  • Top-Load Maytag Neptune TL Series: FAV6800AWW, FAV9800AWW
πŸ“

Related Pages

πŸ“

Other Maytag Washer Error Codes

Show All Error Codes

Model-Specific Notes

Front-load models typically show LOC when the control lock button is held for several seconds. Bravos, Centennial, and VMW top-load models often use the Start or Signal button to toggle the lock. Neptune TL models use a similar lock function tied to the UI panel. If LOC cannot be cleared, the issue is usually a stuck UI button or moisture on the panel.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.