What are the symptoms of error code PF?

Washer stops mid-cycle and displays PF, Washer powers back on but will not resume automatically, Washer beeps or flashes PF repeatedly, Cycle resets or drains unexpectedly, Washer loses settings or restarts from the beginning

What causes error code PF?

Power outage or brownout, Loose power cord connection, Tripped breaker or blown fuse, Voltage drop from overloaded circuits, Faulty outlet or power strip, Internal wiring harness issues, Control board power relay failure (rare)

How do I fix error code PF?

Check if the home breaker has tripped and reset if needed., Ensure the washer---s power cord is fully plugged in., Avoid using extension cords or power strips., Move the washer to a dedicated electrical circuit if possible., Restart the washer and reselect the cycle., If PF occurs repeatedly, test the outlet for voltage stability., Inspect internal wiring harnesses for loose connections., If all external causes are ruled out, inspect the control board.

Maytag Washer - PF Error Code

The washer experienced a power interruption.

Meaning

The washer experienced a power interruption.

The Maytag PF error code indicates that the washer detected a power interruption during operation. This code appears across multiple Maytag platforms, including front-load MAH models, Bravos/Bravos XL/Centennial/VMW top-load models, and Neptune TL washers. The meaning is identical across all platforms: the washer lost electrical power long enough for the control board to register a fault. This may be caused by a tripped breaker, loose plug, voltage drop, or internal wiring issue. The washer will not resume until the user restarts or confirms the cycle.

Symptoms

Washer stops mid-cycle and displays PF
Washer powers back on but will not resume automatically
Washer beeps or flashes PF repeatedly
Cycle resets or drains unexpectedly
Washer loses settings or restarts from the beginning

Causes

Power outage or brownout
Loose power cord connection
Tripped breaker or blown fuse
Voltage drop from overloaded circuits
Faulty outlet or power strip
Internal wiring harness issues
Control board power relay failure (rare)

🔧

Step-by-Step Fixes

Check if the home breaker has tripped and reset if needed.
Ensure the washer---s power cord is fully plugged in.
Avoid using extension cords or power strips.
Move the washer to a dedicated electrical circuit if possible.
Restart the washer and reselect the cycle.
If PF occurs repeatedly, test the outlet for voltage stability.
Inspect internal wiring harnesses for loose connections.
If all external causes are ruled out, inspect the control board.

⚠️

Safety Notes

Disconnect power before inspecting internal wiring or the control board.
Do not operate the washer on a damaged or unstable electrical circuit.
Avoid touching electrical components with wet hands.

📋

Applicable Models

Show Models

Front-Load Maytag MAH Series: MAH3000AWW, MAH4000AWW, MAH5500AWW, MAH6500AWW, MAH7500AWW, MAH8700AWW, MAH9700AWW
Top-Load Maytag Bravos Series: MVWB300WQ, MVWB400VQ, MVWB450WQ, MVWB700VQ, MVWB750WQ, MVWB850YW, MVWB880BW, MVWB950YG
Top-Load Maytag Bravos XL Series: MVWB725BW, MVWB835DW, MVWB855DC, MVWB855DW, MVWB950YW
Top-Load Maytag Centennial Series: MVWC300BW, MVWC350BW, MVWC360FW, MVWC415EW, MVWC425BW, MVWC565FW, MVWC575FW
Top-Load Maytag Early VMW Series: MVWC6ESWW, MVWC700VW, MVWC700VQ, MVWC7000WQ, MVWC7000XW, MVWC7000YW, MVWC750YW
Top-Load Maytag Neptune TL Series: FAV6800AWW, FAV9800AWW

📁

Other Maytag Washer Error Codes

Show All Error Codes

Model-Specific Notes

Front-load models typically show PF after a power outage or voltage drop. Bravos, Centennial, and VMW top-load models often trigger PF due to loose plugs or unstable circuits. Neptune TL models may trigger PF when torque feedback is interrupted by sudden power loss.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.